| From | Message |
ScojoDak
Dodge Dakota
JOIN HERE
2/27/2006
21:47:32
|
 Subject: Fuel Rail Group Buy
IP: Logged
Message:
Alright boys and girls, get em while they're hot. Billet aluminum fuel rails for 5.2/5.9 Magnum motors equipped with either the M1 or kegger intake manifolds. This Group buy is availble from Ross Machine Racing. Retail is $250. However, if we can get 5 or more people, the price would be $199 a set with fittings, stainless hardware and clamps. This GB will be valid for 3 weeks and will end Monday March 20th. Attached either by link (see below), or shown, are pics of the rails. The rails (attached pics) are the updated ones and may not resemble the rails shown on the web site. If you have ANY technical/general questions regarding these rails, contact Matt Cornelius at RMR, NOT ME!
I will only be responsible for these rails if your truck goes 1/10 quicker in the 1/4 mile. *lol*
Here's how you get them.
Contact Matt Cornelius at RMR by phone (410)575-6100 x20 or email cornelius@rossmachine.com and give him your billing/shipping/credit card info and Group Buy Number 371. Also tell him your username and forum/board you're from. Once we hit the minimum number of buyers (5), RMR will begin billing the people already signed up in an effort to get them thier set asap.
Disclaimer per RMR: there are a few intake setups where people with the beer barrel intake might have to "hand tweak" the stainless clamps a bit to get it where it has to be. But other then that, they bolt right up.
http://www.nugroundssocal.com/images/rail1.jpg
http://www.nugroundssocal.com/images/rail2.jpg
http://www.rossmachineracing.com/dodgefuelrails.html
I ScojoDak, am not benefitting whatsoever by eading up this group buy. Just sharing a killer product for a good price.
|
N56629
Dodge Dakota
JOIN HERE
2/28/2006
10:56:06
| RE: Fuel Rail Group Buy
IP: Logged
Message:
That's not a bad price. I've thought about using their material to make my own but it is a bit of work. Getting the AN fittings and hoses can be a bit of a chore too.
Are they offering different colors?
|
ScojoDak
Dodge Dakota
JOIN HERE
2/28/2006
15:42:12
| RE: Fuel Rail Group Buy
IP: Logged
Message:
Red is all that's available.
|
Hmmmmmmmm
Dodge Dakota
JOIN HERE
2/28/2006
21:56:00
| RE: Fuel Rail Group Buy
IP: Logged
Message:
Red works for me. I was just asking in case someone else was interested.
|
ScojoDak
Dodge Dakota
JOIN HERE
2/28/2006
22:14:05
| RE: Fuel Rail Group Buy
IP: Logged
Message:
Now that's a good looking setup ratt darr. Is everything powdercoated except the t/b?
|
N56629
Dodge Dakota
JOIN HERE
3/01/2006
06:35:42
| RE: Fuel Rail Group Buy
IP: Logged
Message:
It's just good old high-temp engine paint. Powder coater wanted about $300 to do that. I might try powder coating small parts myself one of these days.
|
ScojoDak
Dodge Dakota
JOIN HERE
3/01/2006
09:29:04
| RE: Fuel Rail Group Buy
IP: Logged
Message:
Good lookin nonetheless.
|
The Purple1
DakotaEnthusiast
 
3/01/2006
23:23:04
|  RE: Fuel Rail Group Buy
IP: Logged
Message:
N56629:
Say, you wouldn't happen to have masqueraded as "Howdy Doody" once? That righteous setup you have there looks familiar... :-)
P.S. Do you have those in use on an engine? If so, how are the color and finish holding up?
360 Air Intakez, 52 MM Holley Billet, Ported, Hughes Plenum Plate, Perma Cool Fan, Jacobs Pro Street, Moroso Ultra 40, Bosch 4, Superchips, TPS, CPS, IAT Mods, Dynomax Ultra Flo, Transgo, SLT Trim, Diamond Heads & Corners, Clear Tails, Hood Pins, APC White Gauge, PML Polished Trans & Diff Covers
|
N56629
Dodge Dakota
JOIN HERE
3/02/2006
06:36:57
| RE: Fuel Rail Group Buy
IP: Logged
Message:
It gets dirty just like anything else. I have an older M1 that was powdercoated white and it doesn't look very good. At the very least this is much cheaper to touch up. Darker colors, in powdercoat, might fair better.
|
Mikey
Dodge Dakota
JOIN HERE
3/03/2006
09:44:05
|  RE: Fuel Rail Group Buy
IP: Logged
Message:
Hey N56629
Where did you get the MSD from, is it for the 318 or a 287.
How much hotter does it burn, do you get the long lasting spark after 3500 rpms.
99' 5.2,4x4,slt
|
N56629
Dodge Dakota
JOIN HERE
3/03/2006
10:47:37
| RE: Fuel Rail Group Buy
IP: Logged
Message:
It's a 6A and it works on either the v8 or v6. The msd only works and lower rpm - below 3500 if I recall. Above 3500 msd can't keep up and it reverts to a standard type ignition system. Spark duration is 20 degrees and it's rated at 45kv.
|
ScojoDak
Dodge Dakota
JOIN HERE
3/15/2006
23:20:14
| RE: Fuel Rail Group Buy
IP: Logged
Message:
Bumping one last time before the deadline of 3/20
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
