| From | Message |
Fed
GenII
 
11/17/2005
01:38:50
|
 Subject: complete MSD from KRC $300....should i?
IP: Logged
Message:
would any of you suggest going somewhere else to buy this?
MSD Ignition systems
MSD 6A, Taylor 8mm wires and Accel brass cap and rotor
$299
http://krcperformance.com/newcontent/ignition.html
'93 Dakota CC 3.9 auto
(4.10, LSD, magnaflow exhaust, K&N intake, lowered)
|
95V6
GenII
11/17/2005
04:22:27
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
Hmmm, at summit MSD 6A usually at $180, now at $150. Taylor 8mm $35-40, cap and rotor should be around $20. You should be around $210 total.
95 3.9L 4WD V6, K&N, Gibson exh, JBA hdrs, JET stage II, MSD 6A, Rancho shocks and more..
|
Mark
Forum Moderator
11/17/2005
09:56:23
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
I recommend the MSD. It was one of the first mods I installed. After a few years I did switch to autolite platinum plugs. It does wear out your ignition components 3x faster. Careful with most platinum plugs. Most arent designed well. Bosch for example has a teeny tiny thin electrode and if you get a small partical of dirt on it, youre fouled. Just my $0.02
-Mark Hryckiewicz
1993 Sport RC SB 5.2L Auto
|
Fed
GenII
11/17/2005
12:48:56
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
awesome
thanks
'93 Dakota CC 3.9 auto
(4.10, LSD, magnaflow exhaust, K&N intake, lowered)
|
.boB
Dodge Dakota
JOIN HERE
11/17/2005
13:57:03
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
Take a look at Crane Hi-6S. Essentially the same thing except digital (MSD is analog). Quite a bit cheaper.
|
OBIO3
Dodge Dakota
JOIN HERE
11/17/2005
21:35:57
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
you get a piece of dirt as you call it , actually carbin your fouled no matter what plug your running > a short is a short >
|
shannon
Dodge Dakota
JOIN HERE
11/22/2005
00:41:58
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
KRC is high. They really need to come down on there prices. And thats a 6a box. If you have a stick get the 6-al. It have a rev limiter.
|
b1llyw
*DakotaEnthusiast*
11/22/2005
05:56:32
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
I understand how you feel. Summit is a heck of a lot bigger operation than us, in particular they get some killer MSD pricing that I just can't get. We can sell other ignition stuff for less but MSD is what most of our customers are looking for.
Bill White - KRC Performance
'03 SRT-4 w/goodies
|
Fed
GenII
11/22/2005
12:05:55
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
we all understand Bill..
thanks for replying
'93 Dakota CC 3.9 auto
(4.10, LSD, magnaflow exhaust, K&N intake, lowered)
|
Mopar318
GenII
11/22/2005
21:35:34
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
Support the little guy's. When you call summit for a question on how to install your ignition box you will get a universal answer. When you call KRC about your install they will hook you up with what your looking for. They know these trucks inside out.
Just like when all the wal-marts came into town all the little guys with good service went down because we are all cheap scums.
Gibson headers, JBA Y-pipe, Carsound cat, dual exhaust, K&N intake
home built IAT adjuster, 3923 plugs, 180 stat, Gen III 15X8 Rims
Mopar318
|
shannon
Dodge Dakota
JOIN HERE
11/25/2005
00:08:33
| RE: complete MSD from KRC $300....should i?
IP: Logged
Message:
I dont mean to come off as a butt but thats a really big markup. I would not expect KRC to be as cheep as summet or jegs. I know smaller business cant compete with larger ones like summet or jegs, but that price is about 90 dollars over retail. KRC probably doesent pay retail for those boxes. Also, lower prices = more items sold. The more items are sold, the better deal suppliers give business. Again, I dont mean to dog KRC, they are the only ones who are bold enough to specalize in dakots (nobody else gives a crap about these trucks and I thank them for that). But if they want to grow they need to be a little more competative with there prices.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
