| From | Message |
Mopar318
Dodge Dakota
JOIN HERE
8/28/2005
21:16:59
|
 Subject: Gen II dakota cold air
IP: Logged
Message:
I was reading some past post to get an idea of a cold air intake when I came across this http://www.dodgedakota.net/boards/v8/2184.html
If you scroll down a bit you will see a intake for DaveR's truck. Does any body know how he got the dual intake and how it is routed for the ram air. If DaveR is out there I would really like to know some more about this intake. The under hood temps from my headers is hurting my air temp with my K&N open element.
|
ticats
Dodge Dakota
JOIN HERE
8/31/2005
07:43:05
| RE: Gen II dakota cold air
IP: Logged
Message:
Hard to see from that small/dark picture but the box looks like the one from Air Inlet Systems (do a google search for their site).
I've been using one on my Gen III for the past 5 years. The Gen II/III engine bays are different and have a different layout but, in my '97, I run the air ducts up to each side of the rad. The pass. side needs only the removal of the rubber-type flap. The driver's side is more involved ... relocation of the battery and removal/relocation of the rad's overflow bottle.
The Rams have enough clear engine bay space to route the ducts down and then forward to just under the bumper.
ticats, ontario, canada
97 Dak CC Sport, 5.2L, 44RE, race weight 4180lb, pb 13.76 @ 99.65
|
Super-bee
Dodge Dakota
JOIN HERE
8/31/2005
13:32:33
| RE: Gen II dakota cold air
IP: Logged
Message:
prolly grabbed a dual inlet air hat from an old car or truck and stuck it on there and put in some custom tubing
check the junk yards, some of the old cars had dual snorkel air cleaners
or jsut do some custom fabbing
i have access to all the stuff required i could chocp a hole in mine and run another snorkel out the other side
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
