| From | Message |
How Difficult
Dodge Dakota
JOIN HERE
7/13/2005
17:42:14
|
 Subject: May Sound Dumb but...
IP: Logged
Message:
How hard is it to swap out engines? I have a blown 4.7L 01 Dakota and a friend has a 4.7L out of a 01 Dakota I can have. How hard is it to line up the engine with the AutoTrans? Anything special I should know? Im not worried about the rest, Im just worried about hooking it up to the trans (and the Torq. Conv.)
Thanks for any help,
Todd
|
ace
Dodge Dakota
JOIN HERE
7/13/2005
17:46:26
| RE: May Sound Dumb but...
IP: Logged
Message:
fine a few friends that can help, u should b able to figure it out, jus unplug everything n replug, most should just bolt right on
|
Jon
Dodge Dakota
JOIN HERE
7/14/2005
14:09:00
| RE: May Sound Dumb but...
IP: Logged
Message:
It's not hard you just slide them together and put all the bolts in.
|
Tinkerer
Dodge Dakota
JOIN HERE
7/15/2005
19:41:42
| RE: May Sound Dumb but...
IP: Logged
Message:
Like Tinkertoys, man. Damnear impossible to screw it up.
|
044.7
Dodge Dakota
JOIN HERE
7/16/2005
08:48:53
| RE: May Sound Dumb but...
IP: Logged
Message:
How did you end up with a blown engine anyway?
|
How Difficult
Dodge Dakota
JOIN HERE
7/16/2005
13:22:00
| RE: May Sound Dumb but...
IP: Logged
Message:
Not sure how the engine blew. I bought it for $800 and the body is perfect (inside and out). It is a black Regular Cab Motorsport Ed. The guy said he was always on it. I'm guessing more of bad maintance than anything; the oil is real bad. OD says 62,318 miles. Thanks for the replys. I am going to be tackling this project in the coming weeks.
|
daddio
Dodge Dakota
JOIN HERE
7/16/2005
13:46:00
| RE: May Sound Dumb but...
IP: Logged
Message:
sounds like one helluva deal. hope you enjoy it once it's done.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
