| From | Message |
Joel
Unregistered
2/28/2001
19:34:22
|
 Subject: Bernd
IP: Logged
Message:
Bernd, you were right, i do have an MPI on my '93 Dakota 5.2L, so can you tell me if i can still put a TB on there and what other stuff do i have to do/buy to make it fit?
|
Bernd
GenIII
2/28/2001
22:45:52
| RE: Bernd
IP: Logged
Message:
You sure can....
You probably have the older-style "box" intake on your TB...so what you can do it either stick a round 14x3" K&N Air Filter on it...or ,even better, grab an airhat from a '97+ Dakota/Durango and use the intake tube system. (The Round filter will run about $40-$60 and the airhat is about $70 from the dealer).
As for the actual TB, Hughes engines has stock casting replacements (that have been modified though) that should fit...or...Bruce has his 48 and 50mm Billet TB's with custom linkage. He does have a model that will fit the '93 trucks.
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
Joel
Unregistered
3/01/2001
13:16:15
| RE: Bernd
IP: Logged
Message:
Thanks for the info, i already have a K&n filter on my dak (the round kind), i also have a flowmaster cat-back system on it...i will check out the hughes TB...thanks for help...
|
Mark
Forum Moderator
3/01/2001
13:24:21
| RE: Bernd
IP: Logged
Message:
Make sure you dont go with a 14X4 element. The hood will close but after a while it will put dimples on your hood. Thats how I got stuck with a scoop. It was fun taking a sawzall to my hood.
-Mark
|
Bernd
GenIII
3/03/2001
00:22:25
| RE: Bernd
IP: Logged
Message:
OUCH! I know the feeling though...had a slightly too tall filter on the old Javelin, closed the hoos, now I have a nice dimple in it. :(
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
