Forums
Forum Tools
|
 |
15:51:12 - 04/19/2024
Dakota Performance
| From | Message |
NitrouStang96
Dodge Dakota
JOIN HERE
2/18/2004
18:59:21
|
 Subject: RE: nitrous on 4.7
IP: Logged
Message:
I know nothing of the Dodge 4.7, but I run 175hp NX wet on my Ford 4.6, hypereutectic pistons and all.
|
steve sharp
Dodge Dakota
JOIN HERE
2/19/2004
00:49:18
|  RE: nitrous on 4.7
IP: Logged
Message:
I am running an NX system on my 2002 4.7 4x4QC with a Kenne Bell S/C at 6psi. I am running the 50 shot jets right now. Ive been told anything over either of these ranges together, it will be a problem for the pistons. Thats why I will be going to forged in the near future. I am told that nitros by itself you can easily go to 150 jets (which I have, but will put in later). As for the S/C alone K/B sais 10psi max with 100oct race gas. Anything below that you just need 92-94oct. Of course, I personally believe that if your going for high HP its best just to upgrade pistons and heads anyway. Again, I plan on doing this, but I have had no problems at all running my setup.
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
