| From | Message |
Jason
Dodge Dakota
6/23/2001
19:26:34
|
 Subject: What's a good chip for the R/T
IP: Logged
Message:
What's better, Mopar's, Jet, or Hypertech? I have a 99'R/T. And I need a chip that will improve my shift points.
|
Duner
Dodge Dakota
6/23/2001
19:50:36
|  RE: What's a good chip for the R/T
IP: Logged
Message:
There's only 1 choice........the Mopar Performance PCM. None of the others will change the rev and speed limiters. None of them are a "magic" bullet. The Mopar Performance PCM will improve the drivability and makes a big difference where you normally drive the truck.
|
Bernd
Gen III
6/23/2001
19:53:21
| RE: What's a good chip for the R/T
IP: Logged
Message:
Yup...totally agree with Duner: MOPAR
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
Bill
Dodge Dakota
6/24/2001
19:55:47
| RE: What's a good chip for the R/T
IP: Logged
Message:
I am using a Jet chip Stage 1 in my 5.9L 2001 Quad Cab. I can tell a noticeable power increase!! Jet chip claims around 25 HP increase. Also, I believe my truck runs better on 87 octane gas with the chip than it does on 93 octane. I was advised by Martell Bros Racing to get a Stage 1 chip rather than a Stage 2 (more agressive). I'm pleased with my chip, but I'll always wonder what more performace would have been produced by the Stage 2!!!! With the R/T, you would want the Stage 2.
AS far as the speed limitations, I was told the chip would remove the speed limiter. I was involved with a "hit and run" high speed chase before I had my chip. My truck cut out at 110 MPH. I have not had any reason to see if it will go faster now. I guess I should check it... (By the way, I was chasing the hit and run guy. He eventually was caught by 13 police units and got 45 days in jail. WOW)
|
01RTQC
Dodge Dakota
6/25/2001
19:28:58
| RE: What's a good chip for the R/T
IP: Logged
Message:
Guys:
What will the mopar chip or the Jet chip do for the truck? I have a 01 R/T standard cab.
Horse power increase?
Better gas mileage?
More tourque?
How much do they cost?
What are the down side to the chips?
Have to run premium gas all the time?
Where can I get them? Dealership for the mopar I suppose. What about Jet Chip?
Thanks
Mark N
01 Dak RT Std Cab
http://members.nbci.com/marknjul/rtdakota/rtdakota.html
01 Dak Quad Cab 4x4
http://members.nbci.com/marknjul/dodge/dodge.html
|
Travis
Dodge Dakota
6/25/2001
23:59:26
| RE: What's a good chip for the R/T
IP: Logged
Message:
Can't answer the question about the JET, but i can tell you that Mopar will NOT be producing an aftermarket PCM for the 2001's. Apparently they couldnt' get the PCM's to pass emissions, so they've pulled development on them as it was too expensive.
I'm guessing that the JET chip just bumps the timing, but that's just a guess.
|
DEATH GENE
Dodge Dakota
JOIN HERE
10/11/2002
01:19:35
| RE: What's a good chip for the R/T
IP: Logged
Message:
What do you mean Travis? The earlier Mopar Chips wont work for 01 Rams??????
|
DEATH GENE
Dodge Dakota
JOIN HERE
10/11/2002
01:21:42
| RE: What's a good chip for the R/T
IP: Logged
Message:
What do you mean Travis? The earlier Mopar Chips wont work for 01 Rams??????
|
Hersbird
Dodge Dakota
JOIN HERE
10/11/2002
01:27:00
| RE: What's a good chip for the R/T
IP: Logged
Message:
The chips are year, motor, and emission package, specific. Some cross swapping has worked but it's pretty hit and miss.
|
yates-in-DE
GenIII
10/11/2002
03:48:29
|  RE: What's a good chip for the R/T
IP: Logged
Message:
The Jet chip will pull you down about 4-10 hp. Gotta love paying to have power taken away.
Later,
MyVW Killer
Lynn
|
Will
Dodge Dakota
JOIN HERE
10/11/2002
11:00:56
| RE: What's a good chip for the R/T
IP: Logged
Message:
Where is the best place to get a mopar perf. comp?
Thanks, Will
|
quikbear
Dodge Dakota
JOIN HERE
10/27/2002
19:58:22
| RE: What's a good chip for the R/T
IP: Logged
Message:
Jet chips are worthless. I was drag racing at the time and it did absolutely nothing. To the guy who says he can feel the difference, I say take it to the strip and run it with and without and you will see no loss or gain in 60 ft, 330 ft, 1/8mi, 1000ft or1/4 mi. There won't even be a difference in trap speeds. A year later I put the Mopar PCM in and it changed my shift points higher and lowered my ETs by about two tenths.
|
HSKR
Dodge Dakota
JOIN HERE
10/27/2002
22:37:01
| RE: What's a good chip for the R/T
IP: Logged
Message:
The JET stage II chip does work in the R/T. The fastest normally asperated R/T's use a Mopar PCM/JetII combo to get their times. The JET chip advances timing at lower RPMs and the Mopar at higher RPMs. Together they work great.
Personally, I like the Spicier Nacho Dorito's in my truck
|
kota on 20s
GenIII
10/28/2002
02:50:42
| RE: What's a good chip for the R/T
IP: Logged
Message:
brian, i have heard that the pcm "learns" the jet chip, and retards what timing the chip added. do you know anything about this?
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, 3" carsound cat, dumped gibson
|
big_torque
Dodge Dakota
JOIN HERE
10/28/2002
15:56:28
| RE: What's a good chip for the R/T
IP: Logged
Message:
I also have a 99 R/T. I put the Jet stage 2 in and noticed a little more upper rpm power. But that was only for a short time. The computer "learns" the Jet chip and eventually brings back the settings to stock again or even worse. I ran a best 15.48 @ 89 with JET 2
.....and ...... 15.01 @ 92 without.
Same traction , conditions , everything. You be the judge.
I dont know about piggy-backing a Jet on top of a MP PCM. But the Jet by itself is crap. DO NOT waste your $$$. Just look how many are on ebay. I got 50 for mine.
|
HSKR
Dodge Dakota
JOIN HERE
10/28/2002
16:19:46
| RE: What's a good chip for the R/T
IP: Logged
Message:
Yes, I forgot to mention that the people who do use it use it as a track only mod since as you mentioned the computer does learn it.
|
kota on 20s
GenIII
10/29/2002
01:28:13
| RE: What's a good chip for the R/T
IP: Logged
Message:
ahh...ok.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, 3" carsound cat, dumped gibson
|
Mopar Muscle
Dodge Dakota
JOIN HERE
2/09/2003
03:56:43
| RE: What's a good chip for the R/T
IP: Logged
Message:
I have a Jet Chip for sale for the dakota 5.9 R/T.
I sold my truck so I am selling my performance parts I had on it. It has little use and i would like $125
email www.matildeos@yahoo.com
|
afi360
R/T
2/09/2003
16:18:51
| RE: What's a good chip for the R/T
IP: Logged
Message:
i sold my stupid jet chip. mp performance computer is THE ONLY way to go, except a custom flash..anyway, yes, the computer learns the jets changes, and compensates for them..i lost so much power over 3 weeks i could barely squeak the tires from a dead stop. pulled the jet chip, and reset the pcm, the truck was back to where it shouldve been!! i hate them, and jet will never see business from me again.
|
crashgsxr
Dodge Dakota
JOIN HERE
2/09/2003
20:29:36
| RE: What's a good chip for the R/T
IP: Logged
Message:
What ever you do. dont run a Jet chip in an R/T, it actually puts too much timing in at higher rpms and causes a slight detenation. Which actually results in less horsepower. You will see anywhere from 3 to 10 hp loss
|
99CCRT
Dodge Dakota
JOIN HERE
2/11/2003
13:18:25
| RE: What's a good chip for the R/T
IP: Logged
Message:
Don't waste your money with the Junk Chip(Jet Chip). Get the Mopar PCM. Best mod per dollar you can buy. For the best price send John Mercedes an email at jmmtsb@prodigy.net he will be able to give you the best deal on one. -vball005@yahoo.com
|
STEPHANIE
Dodge Dakota
JOIN HERE
4/08/2003
12:14:01
| PLEASE HELP ME
IP: Logged
Message:
I HAVE A REALLY HARD TIME FINDING PERFORMANCE PARTS FOR MY 99 R/T...BASICALLY, I RACED A CAMARO AND LOST...AND NOW I AM DETERMINED TO FIND GOOD QUALITY, HIGH PERFORMANCE PARTS TO ADD TO MY HORSEPOWER. I BOUGHT A HYPERTECH PROGRAMMER BUT IM BEGINNING TO THINK THAT IT WAS A WASTE OF MONEY. SO IF ANYONE KNOWS WHERE I CAN FIND WHAT IM LOOKING FOR, PLEASE LET ME KNOW.
|
2001rt
Dodge Dakota
JOIN HERE
4/08/2003
13:09:48
| RE: What's a good chip for the R/T
IP: Logged
Message:
Stephanie,
There are plenty of go fast goody's for our trucks shot me an e-mail at webo1701@yahoo.com and I'll give you more than enough info w/prefered venders and the lowest cost. The only limit to how fast you can go is how much money you want to spend! lol...
Bobby
|
Joey
Dodge Dakota
JOIN HERE
4/08/2003
15:19:20
| RE: What's a good chip for the R/T
IP: Logged
Message:
i have the '02 r/t and was wondering if a 2000 mopar pcm would work. i know it may not pass emmissions but i could just swap it out every 2 years. also, has anyone had any experience with the kenne bell flash? they claim 16 rear wheel horsepower.
|
Lello
Dodge Dakota
JOIN HERE
4/08/2003
20:33:13
|  RE: What's a good chip for the R/T
IP: Logged
Message:
2001 or 2002, B&G M1 flash.......only way to fly. fyi, mopar and B&G have emission zero at idle to pass it
|
DrewzR/T
Dodge Dakota
JOIN HERE
4/09/2003
12:59:31
| RE: What's a good chip for the R/T
IP: Logged
Message:
Lello what is that b&g M1 flash and where the heii do i find it? Have a 2001 and wanted to compare prices!
|
Ryan Fortner
Dodge Dakota
JOIN HERE
4/09/2003
18:07:18
| RE: What's a good chip for the R/T
IP: Logged
Message:
Go with the hypertech. They have the best gains according to thier website dyno's. You can pick on up at: v8Performance.com
|
Matt
Dodge Dakota
JOIN HERE
4/09/2003
19:58:02
| RE: What's a good chip for the R/T
IP: Logged
Message:
will a MOPAR chip void my warranty? i have the upgraded 10 year 100k mile warranty. thanks,
-Matt
|
goon1
Dodge Dakota
JOIN HERE
4/10/2003
00:44:01
| RE: What's a good chip for the R/T
IP: Logged
Message:
yea i dont have an r/t, but would i be able to get my dealer to flash my 4.7, 02 cc to increase performance. if not them who?
|
afi360
R/T
4/10/2003
02:09:52
| RE: What's a good chip for the R/T
IP: Logged
Message:
matt-if you go in for service, take the chip off. its just that easy.
|
Lello
Dodge Dakota
JOIN HERE
4/10/2003
07:48:19
| RE: What's a good chip for the R/T
IP: Logged
Message:
DrewsR/T......call Dave at B&G Chrysler specialists.....586-758-2003 (Michigan), Not the cheapest but def'ly the most agressive. I went in on a group buy saving $100 each for a group of five. My price was $550 total, two day turnaround. Get the M1 only though
|
| | P 1 Next Page>> |
