| From | Message |
dakrob
Dodge Dakota
JOIN HERE
7/11/2004
16:59:54
|
 Subject: 2.5l ported polished head
IP: Logged
Message:
on ebay i found a company that completely re-builds heads ports and polishes them, they also come with new roller cam and rockers...729 i think...good deal?
|
FazDak
GenII
7/11/2004
22:40:16
|  RE: 2.5l ported polished head
IP: Logged
Message:
Bit pricy for a 4banger but then again, theres not a high demand so they will charge more Im sure.
Before you commit to em call Marty at KRC and see if he can do it fer ya. Far as I know he does V6 heads a lot cheaper then that. Technically you'd think the porting price should be zactly half of a V8 port job huh?
Good luck
|
dakrob
Dodge Dakota
JOIN HERE
7/12/2004
21:36:16
| RE: 2.5l ported polished head
IP: Logged
Message:
well i was wrong about the price he got back to me today and said it would be 600 for a new casting with new valves, reconditioned cam, and a stage 1 port and polish job...what do you think? i also want to know if anyone makes a high performance cam or rockers...ANYTHING! GEEZ.
maybe a HP parts for a jeep will work?
|
CThomp
*GenIII*
7/13/2004
08:12:57
| RE: 2.5l ported polished head
IP: Logged
Message:
avengersupercharger.com
turbocity.com
krcperformance.com
try all of the above. I think pace setter makes a header for the 2.5L jeep. It might need to be modified for the Dak though.
|
FazDak
GenII
7/13/2004
16:00:24
| RE: 2.5l ported polished head
IP: Logged
Message:
Got a few cam part #'s fer ya. Dunno if there still produced but you can check around.
p4452763 430 lift both sides
p4529320 same bit more duration
p4452765 460/430
p4452767 460/460
p5249496 499 both sides HP turbo cam
these are all hyraulic cams
|
dakrob
Dodge Dakota
JOIN HERE
7/13/2004
21:36:56
| RE: 2.5l ported polished head
IP: Logged
Message:
fazdak- thanks for the #'s. im assuming they're mopar performance parts #'s? and cthomp i will look for a web site for pace setter unless you got one for me?
|
FazDak
GenII
7/14/2004
08:33:23
| RE: 2.5l ported polished head
IP: Logged
Message:
NP and yes they are
|
CThomp
*GenIII*
7/14/2004
08:45:25
| RE: 2.5l ported polished head
IP: Logged
Message:
You can probably get that header from turbocity. They deal alot in jeep parts.
|
dakrob
Dodge Dakota
JOIN HERE
7/14/2004
16:04:05
| RE: 2.5l ported polished head
IP: Logged
Message:
rock on :)
any of you 2.5 guys want the web site for the guy selling me the head?
|
dakrob
Dodge Dakota
JOIN HERE
7/14/2004
18:56:25
| RE: 2.5l ported polished head
IP: Logged
Message:
hey,
any of you 4 cyl. guys use msd? and if you do how is it?
|
RAT
Dodge Dakota
JOIN HERE
7/15/2004
01:32:18
|  RE: 2.5l ported polished head
IP: Logged
Message:
I have an MSD, works nice, but don't expect much gain from it. Removing your A/C worked good, and so did junking the crappy air assembly. I also have flowmaster 40 series the helped my top end but I seemed to loes a little of my bottem end with it. Mopar makes a performance book and it has different cams listed in it, so check with mopar and you can probably find a selection of about 3-4 differen cams, from mild to agressive, but poor starting and ideling. As for me I am working on getting my credit up so I can get a loan and do a swap with a 402 Magnum, 6spd Keisler tranny and new LSD rear end. That will be fun.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
