| From | Message |
conig
Dodge Dakota
JOIN HERE
5/18/2004
11:07:29
|
 Subject: 2000 4.7l PCM wire for forward O2 ?
IP: Logged
Message:
what color is the forward O2 sensor wire on a 2000 4.7l. I tried the orange with tan stripe like the 97-99's. However this did not deleiver suffiect signal to my gauge.
Or is there a special volt level needed for an air/fuel gauge for a dodge?
|
FLDak
Dodge Dakota
JOIN HERE
5/18/2004
12:10:37
|  RE: 2000 4.7l PCM wire for forward O2 ?
IP: Logged
Message:
Conig,
I hooked mine up to the BK/DG wire, that is suppose to be the Oxygen Sensor 1/1 Signal. I believe it is pin 24 on the C1 connector on the PCM.
Hope this helps you, if not let me know and I'll go out to the parking lot and verify for sure.
Later Dude...
|
FLDak
Dodge Dakota
JOIN HERE
5/18/2004
12:17:12
|  RE: 2000 4.7l PCM wire for forward O2 ?
IP: Logged
Message:
Conig,
Check your email too!
|
conig
Dodge Dakota
JOIN HERE
5/18/2004
13:05:32
| RE: 2000 4.7l PCM wire for forward O2 ?
IP: Logged
Message:
hey FLDak thanks for the help. Can yo try resending your email to MConiglio@fbmc-benefits.com?
I looked throug my spam folder but didn't see anything.
|
FLDak
Dodge Dakota
JOIN HERE
5/18/2004
15:55:33
| RE: 2000 4.7l PCM wire for forward O2 ?
IP: Logged
Message:
Sure, not a problem!
|
conig
Dodge Dakota
JOIN HERE
5/18/2004
16:52:57
| RE: 2000 4.7l PCM wire for forward O2 ?
IP: Logged
Message:
hey FLdak I received the email, I bet yahoo blocked it do to its size. It will definately come in handy.
I just realized being a 2000 the color for the O2 is proabable different on mine. I guess I can just try and see.
|
FLDak
Dodge Dakota
JOIN HERE
5/19/2004
10:03:45
| RE: 2000 4.7l PCM wire for forward O2 ?
IP: Logged
Message:
Conig,
Mine is an 2002 4.7L, I would think they would be the same?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
