| From | Message |
Anthony
Dodge Dakota
JOIN HERE
4/05/2004
19:38:28
|
 Subject: Installing line lock
IP: Logged
Message:
Just woundering if anyone has installed a line lock on there Dakota? Also, what brand and how difficult as the install with the ABS systems?
|
Ghetto-rig
Dodge Dakota
JOIN HERE
4/05/2004
23:30:12
|  RE: Installing line lock
IP: Logged
Message:
get under your hood and put on rubber lines to the rear and get a pair of vice grips and clamp them off when you wanna smoke the tires.
|
line lock
Dodge Dakota
JOIN HERE
10/01/2004
16:15:52
| RE: Installing line lock
IP: Logged
Message:
bump
|
GUY
Dodge Dakota
JOIN HERE
10/01/2004
16:43:34
| RE: Installing line lock
IP: Logged
Message:
just buy a line lock solenoid from summit racing for like 40 bucks. get some wire from radioshack and a switch to activate it. You install it in the brake line, it holds brake fluid in the line when you let go of your brake pedal. good luck!
|
Read
Dodge Dakota
JOIN HERE
10/03/2004
13:43:00
| RE: Installing line lock
IP: Logged
Message:
the instructions that come with it!!!
|
.boB
Dodge Dakota
JOIN HERE
10/03/2004
22:17:01
| RE: Installing line lock
IP: Logged
Message:
It may not be as easy as you think. It must be installed in the common brake line for both sides. Most people want it in the front brakes, so they can smoke the rear tires. Some off roaders like it in the rear brakes for help on hills.
Installing in the rear is pretty simple. There's only one line, so you just splice it in as per the instructions. It shouldn't interfere with rear ABS.
The front can be a little trickier. There's usually one line from the MC to the differential valve. But there's often two lines coming from the valve, one for each caliper.
In a Ford, you can block off one of the valve ports, and replumb the lines to a single line with a T. I don't know if you can do that with a Dodge. Most likely you can, But I'm not sure.
You cannot place it ahead of the differential valve. If you do, the first time you activate the solenoid and let off the pedal, the brake warning light will come on and stay on.
I wouldn't put one in the system with front anti-locks.
|
Riv
Dodge Dakota
JOIN HERE
10/08/2004
19:58:35
| RE: Installing line lock
IP: Logged
Message:
I believe SLP makes a kit for camaro's. They have the same anti-lock type systems as we do. Check int their website
|
Al B
Dodge Dakota
JOIN HERE
7/14/2013
15:39:40
|  RE: Installing line lock
IP: Logged
Message:
can someone tell me witch is the inlet when plumbing a summit line lock #760000
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
