| From | Message |
jaggy
GenIII
3/22/2004
13:31:37
|
 Subject: RE: Cam help
IP: Logged
Message:
Thanks for the great input guys (Beekota, B1llyw and Pittdawg)
My project Dak is just about complete and I think I can finish it off with a PCM flash from KRC and 70 mm F&B TB.
Now to save up the $ for that.
Donkey, The 180 Thermostat lets you engine run a little cooler. (stock is 190 or 195)
I also took off my clutch fan and have had no over heating issues. Even in summer my temp never gets to the 195 mark. No real performance gains but lets your other mods work better.
B1llyw, If you do the flash for me can you set the speedo for different size tires? or is there another way to correct the speedo? also how much is that flash running?
Thanks again.
|
Demon Dakota
DakotaEnthusiast
3/22/2004
15:53:20
| RE: Cam help
IP: Logged
Message:
Headers work great...but they have to be real headers, not the precat BS that is usually sold for our engine. You can find someone with exhaust design/building experience that can build you a set for about what it costs to buy aftermarket ones now, and they will be long tube equal length for true duals...
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
Custom tranny VB Mod
Demon long tube headers
Ported/polished heads w/ 1.92" Intake/1.60" Exhaust Valves
One dead stock LSD unit (POS...)
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
