| From | Message |
hoytshooter
Dodge Dakota
JOIN HERE
5/31/2002
22:47:40
|
 Subject: 3" PA body lift & tires
IP: Logged
Message:
Sounds like everybody loves the body lift. Great it could save me some cash. I've got a 2000 dakota and have stock 31 x 10.5 x 15's on it now, but if I put the body kit on it will I be able to fit 33 x how wide can I go? x 15's. will I only be able to use 11.5's or 12.5's? Thanks for the help. C-Ya
|
bjlindsey
*GenIII*
6/01/2002
00:19:36
|  RE: 3
IP: Logged
Message:
33x12.50x15s or 305/70-16s
01 QC 4x4 5.9L 3.92 LSD
3" Body Lift, 305/70-R16 XTerrains,
K&N clone, Clear Corners, Carbon Fiber Tails,
www.FreeGasForYou.com
|
hoytshooter
Dodge Dakota
JOIN HERE
6/01/2002
00:27:06
| RE: 3
IP: Logged
Message:
plan on using stock rims my dakota is a 2000 4.7 club cab auto full time 4x4 transfer case with extra spring in back from factory. it came stock with the 31's so I think the rims are the wider ones. I'll have to check on my paperwork. thanks for the help, i'm sure i'll have more questions soon.
|
tim t
Dodge Dakota
JOIN HERE
6/01/2002
17:53:20
| RE: 3
IP: Logged
Message:
i have a 2000 qc with a pa 3" body lift and 33x12.50x15's on the stock wheels work great
|
Rob454
Dodge Dakota
JOIN HERE
6/02/2002
00:13:52
| RE: 3
IP: Logged
Message:
I have 33s on my dakota and its not lifted at all. also got a warn winch and transformer system. Im not sure how to post pics but I can ask a buddy from another web site to host them and Ill post a link
Rb
|
hoytshooter
Dodge Dakota
JOIN HERE
6/03/2002
12:22:26
| RE: 3
IP: Logged
Message:
o.k. but did you have to do any trimming of the fenders? my dak already has the flares, but i don't want to trim anything. and what does cranking up the torsion bars hurt if anything?
|
Knobbyman
*GenIII*
6/03/2002
13:17:05
| RE: 3
IP: Logged
Message:
Hoytshooter - If you run a 3" Body lift and 33x12.5x15 ProComp Xterrains there will be a very small amount if any rubbing. Cranking the Torsion Bars wears them out alittle faster but nothing else.
'01 Graphite QC 4x4
4.7 3.55 LSD
4.5" Customized Suspension Lift
305x70x16 GoodYear MT/R's
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
Rob454
Dodge Dakota
JOIN HERE
6/04/2002
01:03:31
| RE: 3
IP: Logged
Message:
All I had to trim was the front plastic piece. it was very slight trimming. on the rear of the fender well you need to remove a couple of inches of plastic but you dont have to trim the fender flares or anythgn liek that. the only reason for the triming is the wheels will rub when turning if you trim the m slightly they dont rub at all. the dakotas have pretty big wheel wells
Rob
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
