Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
17:20:53 - 04/18/2024

Off Road
FromMessage
Dan Gruber
GenIII
 User Profile


4/29/2002
12:51:31

Subject: Workin' the credit card!
IP: Logged

Message:
Finally made the decision to do two more changes to my truck, and I'm workin' my credit card hard!

Change 1: Just ordered new upper & lower ball joints from Napa. My driver's side upper looks like it has seen better days, so I decided to do all of them at once. I had to order upper's for a 99 since there's nothing listed in the parts catalog for a 2000. The drawing in the parts book looks identical to what's on the truck, so I'll find out if they will work when I pick them up later today. If they work, I'll post the parts numbers for anyone who is interested. I'm still under warranty, but I hate the idea of replacing a substandard part with another substandard part that I know I will have to replace in two more years. Cost for parts: just under $300.

Change 2: Just ordered new gears from Randy's Ring & Pinion. Got 3.55's now, ordered 3.90's. With the stock 31 inch tires, the overall gearing was a little too tall for my taste, and switching to 32's made it worse. And same old story...limited to Dodge parts for the front diff since Dodge switched from the Dana 35 to the Dodge 205mm (8 inch) for 2000, otherwise I might have gone as deep as 4.10's. Cost for parts: $783 with all new bearings, shims, crushsleeves, etc; $589 without all that stuff.

I'll pick up the ball joints today and the gears will be here Wednesday or Thursday.

Start Right! Use Autolite!
Dan
2000 CC SLT 4.7 4X4 Auto 3.55 LSD
3 inch Performance Accesories lift & 32 inch BFG MT KM's

Viper
GenIII
 Email User Profile


4/29/2002
13:26:42

RE: Workin' the credit card!
IP: Logged

Message:
Your going to make John very jealous Dan and its not nice to make John angry!!!hehehe,Anyway welcome to the club of lower gears and higher RPMs.

'00 Quad,4x4
33x12.50s X-TERRAINS
3.92,4.7 Intense Blue

Dan Gruber
GenIII
 User Profile


4/29/2002
18:05:40

RE: Workin' the credit card!
IP: Logged

Message:
Thanks Viper...not there yet, but soon. As soon as I get the gears in I'll call the shop I'm having it done at to make the appointment. They should be in by Wednesday or Thursday, so I'm hoping to have them installed by the end of next week.

And if John gets angry...well...he'll get over it! You two made me jealous with your lifts and black wheels!!

Start Right! Use Autolite!
Dan
2000 CC SLT 4.7 4X4 Auto 3.55 LSD
3 inch Performance Accesories lift & 32 inch BFG MT KM's

Hawkeye
*GenIII*
 Email User Profile


4/30/2002
19:46:33

RE: Workin' the credit card!
IP: Logged

Message:
Dan, you need to call me.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.