| From | Message |
Epyon
Dodge Dakota
JOIN HERE
12/27/2007
17:17:02
|
 Subject: Can you pull it into 4x4 well moving?
IP: Logged
Message:
1997 Dakota 3.9 V6 5 Speed 4x4
I was wondering if anyone knew if u could pull it into 4 wheel drive well moving and if so up to what speeds for 4x4 Hi. I should have the 231 transfer case but my shifter for 4 wheel is on the floor (mechanical linkage) not vacum like most have now on the dash
|
Kowalski
GenIII
12/28/2007
16:29:42
| RE: Can you pull it into 4x4 well moving?
IP: Logged
Message:
We're fortunate to have the less problematical mechanical linkage; never had any problems engaging mine at speeds up to 55 or so.
Lead, follow, or get out of the way
|
Epyon
Dodge Dakota
JOIN HERE
12/28/2007
17:52:39
| RE: Can you pull it into 4x4 well moving?
IP: Logged
Message:
Hey thanks Kowalski just never knew if it could be done thanks again
|
Kota Kid
Dodge Dakota
JOIN HERE
1/08/2008
19:42:44
|  RE: Can you pull it into 4x4 well moving?
IP: Logged
Message:
You can shift from 2wd to 4wd high at any speed you want providing the front tires are going the same speed as the back ones, you have to be completely stopped and the trans has to be in neutral to go from 4wd high to 4wd low. Don't even think about putting it into 4wd while you are spinning the rear tires, you will not like the possible outcomes. I went muddin with a guy one time in a 98 ext cab 318 Dak that had no idea what he was doing and got himself stuck, when he stopped moving forwards instead of hitting the brakes and stopping the rear tires he just yanked the shifter back without even lifting off the gas. His transfer case grenaded into 4 completely different pieces, and his front drive shaft got busted at the same time. I really wished I had a camera on me that day, it was cool looking!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
