Forums
Forum Tools
|
 |
07:13:12 - 04/26/2024
Off Road
| From | Message |
Skeletor86
Dodge Dakota
JOIN HERE
2/13/2007
17:04:33
|
 Subject: CV Shaft, I thought
IP: Logged
Message:
Guys,
I just had to replace my lower control arm as the shock mount on it broke off, don't ask. I found a junk yard replacement for $75 and while I was at it replaced the lower ball joint with a Moog, and then a new CV shaft as I was starting to hear clanking noises from there. Well it was a pain in the ass to get the CV shaft out, and then the new one in, but it is still making the noise except louder now, but only when 4 wheel drive is engaged. Help!
Rich
2001 Quad Cab 4x4, 5 speed 4.7
|
Super bee
GenI
2/14/2007
01:55:44
|  RE: CV Shaft, I thought
IP: Logged
Message:
maybe if you didnt use the truck so much driving around the rough terrain on eternia you wouldnt have these problems
1990 sport RC SB, 1995 318drivetrain, 3.92 gears (came with truck) Powertrax "traction system", 95 dash/steering wheel, hearthrob exhaust, headers, cutout after y-pipe, necessary electric fan add-a-leafs, 30x9.5 mud tires, cranked T-bars, AR 39 15x8 rims, grill guard, roll bars
|
blkfly59
Dodge Dakota
JOIN HERE
2/14/2007
20:07:15
| RE: CV Shaft, I thought
IP: Logged
Message:
Front drive shaft cv right? Sounds like the bearing on the transfer case side of the front drive shaft has gone out on you. You need to replace the whole shaft assembly, bearing and all. I had the same noise your describing. Happened while driving too fast in 4WD.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
