Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:58:08 - 03/29/2024

Off Road
FromMessage
Chucky
Dodge Dakota
JOIN HERE


2/14/2006
22:31:15

Subject: Skid Plate Blueprints
IP: Logged

Message:
Does anybody know were to find some blueprints for some skid plates on a 99',4x4,slt,5.2.
I thought I saw some on a thread last year for the front diff, transfer case and the gas tank.
Also how thick should the plates be.
I have the steel but it's not stainless.

Thanx.



Justin
Dodge Dakota
JOIN HERE


2/15/2006
20:19:46

RE: Skid Plate Blueprints
IP: Logged

Message:
also looking for these for the 3.9 v6 with a 3" BL...

Chucky use 1/4" plates. I know a guy who used the standard 1/8" plates and it did nothing but tear into pieces when he bottomed out.




SteveJ
Dodge Dakota
JOIN HERE
 Email

2/15/2006
21:01:33

RE: Skid Plate Blueprints
IP: Logged

Message:
I downloaded a copy last year.
Single line diagram in pdf format.
If you want it, send an e-mail to the link provided.



Chucky
Dodge Dakota
JOIN HERE


2/15/2006
22:03:01

RE: Skid Plate Blueprints
IP: Logged

Message:
What link?



Chucky
Dodge Dakota
JOIN HERE


2/16/2006
20:28:03

RE: Skid Plate Blueprints
IP: Logged

Message:
Thanx Steve.
Do you think I could use those for a 99'5.2Slt.
Also are they both for the transfer case,or one for the front diff.

Thanx again



OBIO3
Dodge Dakota
JOIN HERE


2/17/2006
22:20:07

RE: Skid Plate Blueprints
IP: Logged

Message:
1/4 inch is going to ad a lot of weight or at least way to much for me. The idea is not to build a tank but rather something to obsorb the initial shock there by protecting your undercarrage. 3/16 is about as thick as you want to go.

So many problems .... So little time



Dan M
Dodge Dakota
JOIN HERE
 Email

2/18/2006
16:27:15

RE: Skid Plate Blueprints
IP: Logged

Message:
1/8" is a little thin for "medium" or harder off road trips and will damage easily. Little to no rocks? no problem 1/8" is good enough.

If you are going to be doing more than a beginner trail go with something thicker.

- Dan M



calikota
Dodge Dakota
JOIN HERE
 Email

2/28/2006
03:03:31

RE: Skid Plate Blueprints
IP: Logged

Message:
I made the ones for the front differential and tranfer case out of 1/4 inch. I really didn't notice any difference in weight?? They have really protected my trucks under-carriage.

If anyone has the plans for the gas tank plate I would appriciate the drawings for it.

Thanks in advance
snu126@yahoo.com

04 4x4 SXT 3.7 v6
westin nerfs, after market fogs, thunderform, tint, drop in k&n, front tow hooks, torsion crank, spray in liner the rest is pretty much stock.



bumpster
Dodge Dakota
JOIN HERE
 Email

3/03/2006
13:59:20

RE: Skid Plate Blueprints
IP: Logged

Message:
bump



Dan M
Dodge Dakota
JOIN HERE
 Email

3/03/2006
15:22:41

RE: Skid Plate Blueprints
IP: Logged

Message:
I have a set of factory skid plates (transfer case and front suspension). I got hosed on shipping so will not see them until beginning next week.

Anyone have the blueprint for the fuel tank skid plate for an 02 quad cab?

I didn't get one yet because it was too expensive.

- Dan M



six8six
Dodge Dakota
JOIN HERE
 Email

3/09/2006
00:14:49

RE: Skid Plate Blueprints
IP: Logged

Message:
i have a factory skid plate i bought off ebay that wont fit my 2000 dakota. It will fit a 97-99 dakota. i will sell it for $200CDN email me for pics and info. six_8_six@hotmail.com



novaDAK
Dodge Dakota
JOIN HERE


3/12/2006
21:12:45

RE: Skid Plate Blueprints
IP: Logged

Message:
can someone post a link or E-mail me the blueprints?
Mine's a 1998
This would be very helpful.
thanks.



forexfourchri
Dodge Dakota
JOIN HERE
 Email

3/20/2006
22:09:23

RE: Skid Plate Blueprints
IP: Logged

Message:
Here is a link to the plans that were made up. They will work for 2000 - 2004 Dakota's, Check Transfer case plate hole line up before drilling. The rear holes may need to be back a couple inches. all the rest will match up good.

http://www.caoffroaders.com/dakotaskidplate/dakotaskidplateplans.pdf

Chris



Subham
Dodge Dakota
JOIN HERE
 Email

7/12/2012
23:37:32

XypKiRctRhGhuXjl
IP: Logged

Message:
I pray for these family mbreems,that Jesus will comfort them,and help them in their battle against their addictions etc,heal them and make them whole again for His Glory,Bless them and all those who help out,that He will give you all to your needs,praise Him for all that He accomplishes through you all.God Bless my Family,my heart and thoughts are with you!



Richard
Dodge Dakota
JOIN HERE
 Email

10/08/2013
14:29:25

RE: Skid Plate Blueprints
IP: Logged

Message:
Chris,

Any chance you still have a copy of those blue prints?? The link no longer works but I am looking for skid plates for 2000 dakota. I've been to several junk yards and what I have found was either plastic, busted/rusted up, etc.

If I don't find prints soon though I'll just have to design myself.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.