Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:15:34 - 05/02/2024

Off Road
FromMessage
Justin
Dodge Dakota
JOIN HERE


12/02/2005
11:05:15

Subject: Anyone running 33x12.5 on stock wheels?
IP: Logged

Message:
I've got a 97 4x4 with a 3"BL, most guys i see have eagle alloy wheels with less backspacing. anyone here running 12.5s with stock wheels on a GenIII? how's the rubbing on the frame? thanks



caulk04
GenIII
 Email User Profile


12/02/2005
18:08:54

RE: Anyone running 33x12.5 on stock wheels?
IP: Logged

Message:
They will rub the frame...to wide.

Less amount of backspacing will put the wheel farther out. I beleive the backspacing is measured from the face of the wheel...not sure though.

'02 CC 4x4 4.7 HO
http://www.cardomain.com/ride/2147050

THRASHER
Dodge Dakota
JOIN HERE


12/03/2005
20:04:53

RE: Anyone running 33x12.5 on stock wheels?
IP: Logged

Message:
I ran 33x12.5 on stock wheels with and without a bodylift. The frame rubbing isnt bad. I wheeled mine a lot and had no issues. I ran a 33x12.5 x terrain, 33x12.5 swamper, and a 33x12.5 BFG, BFG rub the most, swampers rubbed the least.



cyrjm
Dodge Dakota
JOIN HERE
 Email

1/19/2006
08:28:57

RE: Anyone running 33x12.5 on stock wheels?
IP: Logged

Message:
I run 33x12.50s Dueler's on stock and they rub only at full lock. I live in Utah which has these drainage ditches on EVERY driveway and they rub when I hit those at a certain angle. The problem with stock is that they are only 7 inches wide (i have been told) and that for 12x5 wide tires you need at minimum 8 inches or you start crowning your tires...mine are starting so I'm looking for new black, steel rims with a different backspacing to make my trucks stance wider. My tires vibrate and it's not because of balance issues...it's the small width on the stock rims. I also did crank my torsion bars up too...not all the way but enough and I had to cut a bit of the plastic crap off.



Jetsfan8099
Dodge Dakota
JOIN HERE


1/30/2006
19:27:10

RE: Anyone running 33x12.5 on stock wheels?
IP: Logged

Message:
My Goodyear MT/R's are 305/70R16 (33.1" X 12.3") on stock 16x8" rims. They fit perfect, no crowning, no rubbing. 3" BL and 1" torsion crank.



Tony Moore
Dodge Dakota
JOIN HERE
 Email

2/16/2006
05:26:43

Letter of business cordinates
IP: Logged

Message:
The Royal Bank of Scotland Plc
London Cavendish Square Branch,
28 Cavendish Square,
London, W1M 0BD...

My name is Tony Moore; I am the credit manager of Royal trust Bank here in the United Kingdom. I am contacting you for a business transfer, Though, I know that a transaction of this magnitude will make any one apprehensive and worried, but I am assuring you that everything has been taken care off, and all will be well as we cooperate mutually. I decided to contact you due to the urgency of this transaction. PROPOSITION: I am the account officer of Mr. Gerald Welsh, who died in an air crash along with his wife on the 31st October 1999 in an Egyptian airline 990 with other passengers on board. You can confirm this from the website below which was published by CNN .WEBSITE. http://www.cnn.com/US/9911/02/egyptair990.list Since his death, none of his brother, sister or next-of-kin are available to make claims for this money, because they are the only surviving family before their death by air crash, himself and his wife (May Their Soul Rest in Peace). We cannot release the fund from his account unless someone applies for claim as the next-of-kin to the deceased as indicated in our banking guidelines. Upon this discovery and published in the bank official gazette , I now seek your permission to have you stand as a next of kin to the Mr. Gerald Welsh, as all documentations will be carefully Worked out by me for the funds £12,600,000:00 to be released in your favor as the beneficiary's next of kin. Because after 30 day of this publication, the money will be called back to the bank treasury as unclaimed bills. So, it is on this note that I decided to seek for whom his name shall be used as the next of kin/beneficiary to this funds rather than allow the bank directors to share this money amongst themselves at the end of the year. It may interest you to know that we have secured from the probate an order of mandamus to locate any of the Mr. Gerald Welsh’s beneficiaries. Please acknowledge receipt of this message if you are willing to cooperate And in acceptance, furnishing me with the following information
1. A Beneficiary Name. With which we can open an account, In order for me to prepare the Document for the transfer of the fund. .
2. Direct Telephone, Mobile and fax numbers. For personal contact, and mutual trust in each other.
3. Your international passport for the processing of the required documents. Do not be afraid, I have worked out all modalities, upon your acceptance I shall send you a copy of my international Passport and drivers license for more confidentiality and trust.
I shall be compensating you with three million five Hundred thousand dollar £3,500,000:00 on final conclusion of this project for your assistance, while the balance £9,100,000:00 shall be for me for investment purposes. Because I intend to retire after the conclusion of this transaction. If this proposal is acceptable by you, please endeavor to contact me immediately.

Do not take undue advantage of the trust I have bestowed in you, I await your urgent response.
EMAIL; t_moore20022002@yahoo.co.uk
EMAIL; t_moore20022002@yahoo.co.uk

Regards,

MR. Tony Moore
Credit Control Manager,
Royal Trust Bank Plc
WEBSITE: www.rbs.com, www.rbs.co.uk.








Lucas
Dodge Dakota
JOIN HERE


2/16/2006
17:57:06

RE: Anyone running 33x12.5 on stock wheels?
IP: Logged

Message:
had 33x12.5 on stock rim for a yr. now. not bad at all, just don't turn to full lock and you will be fine. i think it might actually put less strain on pw steering pump not being able to turn full lock.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.