| From | Message |
jody
Dodge Dakota
JOIN HERE
3/04/2005
18:54:29
|
 Subject: P.A. and 35's
IP: Logged
Message:
i read somehwere that the 3 inch P.A. body lift will accomodate 35 inch tires on stock wheels. this was supposed to be on a 2000 durango..anyone know anything baout this?
|
no way
Dodge Dakota
JOIN HERE
3/04/2005
19:27:53
|  RE: P.A. and 35's
IP: Logged
Message:
absolutely no way. not even close as a matter of fact. maybe if you had no feneders at all. even then you couldn't turn do to frame rub, especially on stock rims. whoever told you that was wrong.
|
daksprt4x4
Dodge Dakota
JOIN HERE
3/05/2005
09:27:43
| RE: P.A. and 35's
IP: Logged
Message:
i know a guy who did it on a dakota. looked stupid the tires were stuffed into the fender wheels. he didnt drive it much couldnt turn the wheels enough to pull into a parking space with out driving it like a semi.
|
Outlaw
Dodge Dakota
JOIN HERE
3/06/2005
14:31:25
|  RE: P.A. and 35's
IP: Logged
Message:
I have a P.A. 3 inch body lift on my 99 Dak with 35 inch BFG all-terrains and they are not stuffed in the wheel wells.
|
THRASHER
Dodge Dakota
JOIN HERE
3/08/2005
12:44:54
| RE: P.A. and 35's
IP: Logged
Message:
A few have done it and I have gone wheeling with a guy who runs that combo. Works and looks good. Dakotas have no front travle anyways so you wont be stuffing to bad.
Just search and you will find the stuff you need to know...
|
silva8
Dodge Dakota
JOIN HERE
3/14/2005
19:22:36
| RE: P.A. and 35's
IP: Logged
Message:
I have the PA and 33x12.50 and they rub a little so I cant see how 35 will not rub
|
natedawgg01
Dodge Dakota
JOIN HERE
3/15/2005
12:55:27
| RE: P.A. and 35's
IP: Logged
Message:
I have a 2" lift and 33x12.5x15 on aftermarket wheels and they rubb the frame when fully turned, so 35 will not work unless you have some nasty offset wheels, and some lower fender and lower bumper trimming.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
