Forums
Forum Tools
|
 |
07:45:10 - 04/18/2024
Off Road
| From | Message |
Jonny-G
Dodge Dakota
JOIN HERE
1/05/2004
12:32:13
|
 Subject: Fitting 33's?
IP: Logged
Message:
Im gettin my 3" body and then my 33's. i see alotta trucks on here with the same set up and i was wondering how much trimming did ya'll have to do for them to fit??(pictures would be great) and do they rub the frame ? if so, bad? or did ya use spacers??
|
LiLThurmy03
Dodge Dakota
JOIN HERE
1/05/2004
12:50:23
|  RE: Fitting 33's?
IP: Logged
Message:
i had 33's on mine with a 3 inch body lift. then i cranked the torsion bars and threw 35's under it. anyways, to fit 33's you dont have to do a lot of trimming. if you plan on running 15x8 or 16x8" wheels, then you wont have to do much at all. if you run 15 or 16x10" then you will have to do a little more. on the front inner fenders, just trim on the outside, where the valence meets the inner fender. you mite have to do a little trimming on the back of the fender too. and no, with 33's you will not rub the frame. hope this helps.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
