| From | Message |
forexfour
GenIII
 
11/10/2003
09:43:45
|
 Subject: Want to see the inside of a CV Joint?
IP: Logged
Message:
Not mine thankfully but this is from this last weekend my friends '01 Quad cab. He was able to get it the 60 miles back to his local mech at 40 MPH.
Sorry John!!!
Here is where it happened. Should have had the video camera going.
Chris
Never late for a Tee time or wheelin with my buddies! Always ready for both!!!Forexfour's home
|
THRASHER
Dodge Dakota
JOIN HERE
11/10/2003
16:35:16
| RE: Want to see the inside of a CV Joint?
IP: Logged
Message:
Chris..
When are you and Craig going to go up to hollister....we have gotten a ton of rain, and i cant wait for the mud.....let me know when you go..
|
forexfour
GenIII
11/10/2003
17:08:28
| RE: Want to see the inside of a CV Joint?
IP: Logged
Message:
that is where we were when this happened yesterday.
It was not so bad, the mud is still trying to form and the ground is really sucking up the Water still.
We are supposed to go 11-22 with another group. I can only make it for maybe half a day sine I need to be in Fresno by 2 or so that day.
Where have you been, well I know but man you have been gone a while!!!!
We gotta get back out, bud! You still wanting those torsion bars?
Craig just got back from Glamis, that lucky bastard!!! He was there for a week I think.
Chris
Never late for a Tee time or wheelin with my buddies! Always ready for both!!!Forexfour's home
|
THRASHER
Dodge Dakota
JOIN HERE
11/10/2003
18:52:11
| RE: Want to see the inside of a CV Joint?
IP: Logged
Message:
I have been really busy, things have slowed down...i still want the torsins if you have them, i just put some rancho shocks on my truck, and am getting ready to put a dana 44 under it...
|
Perpetrate
GenIII
11/11/2003
12:19:49
| RE: Want to see the inside of a CV Joint?
IP: Logged
Message:
1 week of sand blasting on the quads and a few trips out in the Dak.
1400 miles, 22 hours of driving, 200 gallons of 91 octane, 80 gallons of water and 2 sore butts.
I am sick of sand and ready for the mud!
Kev - You will be the tallest Dak in town with a Dana 44!!! You will not have this CV axle problem with a SAS. You doing leafs or coil over shocks?
|
THRASHER
Dodge Dakota
JOIN HERE
11/11/2003
15:26:18
| RE: Want to see the inside of a CV Joint?
IP: Logged
Message:
Craig....
I am going to be running the ford front end...coils and radius arms...
kevin
|
Perpetrate
GenIII
11/11/2003
16:15:05
| RE: Want to see the inside of a CV Joint?
IP: Logged
Message:
Cool, there is a Dak running that setup with a Ford 9" in the rear also. Are you going to swap the rear axle to get the bolt patterns the same?
|
THRASHER
Dodge Dakota
JOIN HERE
11/11/2003
17:58:29
| RE: Want to see the inside of a CV Joint?
IP: Logged
Message:
I am not sure...i am doing my self, so i am going to try to get the front axle in as fast as i can to cut down time....if i can get both axles for a good price, mabye i will swap the 9 into the back...i was planning on running the ar767 and compensate in width with backspacing....
i will cruz by your shop sometime this week, got to show you the new dog..
later
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
