| From | Message |
HemiDakota97
Dodge Dakota
JOIN HERE
12/31/2002
17:06:22
|
 Subject: Lowering back to stock
IP: Logged
Message:
I'm looking for a website that carries all the bolts and everything to put a lifted Dakota back to stock suspension height. Also, if Anyone would like to buy a barely used Rancho 3" suspension lift with Trailmaster SSV shocks and al of the brackets and bolts e-mail me at Getchasome224@aol.com or just post on here and let me know. I'm only asking $600 for everything. i'm looking to go back to stock suspension.
|
why
Dodge Dakota
JOIN HERE
12/31/2002
22:35:36
|  RE: Lowering back to stock
IP: Logged
Message:
Why what went wrong?
|
HemiDakota97
Dodge Dakota
JOIN HERE
1/01/2003
06:06:21
| RE: Lowering back to stock
IP: Logged
Message:
Nothing went wrong, i am just going to drop it down because i plan on building a complete new front suspension for my truck and i'd rather ride on the stock suspension for now. There are no problems with the lift i just don't need it any longer.
|
HemiDakota97
Dodge Dakota
JOIN HERE
1/02/2003
20:51:25
| RE: Lowering back to stock
IP: Logged
Message:
Also does anyone know if you can remove the whole front axle assembly and still drive your truck on the road, i want to try it because i wanna get my truck ready to put a straight axle in it.
|
josh
Dodge Dakota
JOIN HERE
1/02/2003
23:15:40
|  RE: Lowering back to stock
IP: Logged
Message:
yeah man you should be able to just disconnect from the cv axle and spindle then disconnet the front drive shaft.
|
HemiDakota97
Dodge Dakota
JOIN HERE
1/03/2003
02:15:34
| RE: Lowering back to stock
IP: Logged
Message:
What do you mean? What i want to do is remove the whole front drive unit. The axle assembly, the cv axles and front driveshaft. My question is can i do that and still drive my truck or will the front suspension not hold together?
|
UWGriz
Dodge Dakota
JOIN HERE
1/03/2003
08:24:31
| RE: Lowering back to stock
IP: Logged
Message:
Your hub/bearing assemblies won't hold together, they rely on the half-shafts to hold them in place.
|
HemiDakota97
Dodge Dakota
JOIN HERE
1/03/2003
08:53:18
| RE: Lowering back to stock
IP: Logged
Message:
i thought they were just bolted to the spindle and used that for support?
|
UWGriz
Dodge Dakota
JOIN HERE
1/03/2003
09:21:40
| RE: Lowering back to stock
IP: Logged
Message:
They do bolt to the spindle, but the hub nuts and half-shafts hold the bearings together.
|
HemiDakota97
Dodge Dakota
JOIN HERE
1/03/2003
09:30:49
| RE: Lowering back to stock
IP: Logged
Message:
well..... that sucks. i guess i'll have to settle for just taking off the suspension lift and thats it.
|
Timberwolf
GenIII
1/03/2003
15:46:57
| RE: Lowering back to stock
IP: Logged
Message:
Hey Hemi. Maybe if someone buys your suspension, they'll give you all the stock parts from their truck.
|
HemiDakota97
Dodge Dakota
JOIN HERE
1/03/2003
17:15:43
| RE: Lowering back to stock
IP: Logged
Message:
All i really need is the bolts, timber, nut that is a good idea.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
