| From | Message |
Jared
Dodge Dakota
JOIN HERE
11/23/2002
21:39:58
|
 Subject: front passenger side lower
IP: Logged
Message:
I JUST BOUGHT A '99 DAKOTA 4X4 AND I NOTICED THE FRONT PASSENGER SIDE IS ABOUT HALF AN INCH LOWER THAN THE DRIVERS SIDE. ANYONE KNOW ANYTHING ABOUT IT?
|
shiftrider
Dodge Dakota
JOIN HERE
11/24/2002
01:32:27
|  RE: front passenger side lower
IP: Logged
Message:
now where you able to measure this with you sitting in the truck??? because it is setup to have someone driving the truck, so with a driver's weight it is level
|
Jeffro
Dodge Dakota
JOIN HERE
11/24/2002
01:48:59
| RE: front passenger side lower
IP: Logged
Message:
Maybe if the driver were Anna Nicole Smith, otherwise I'd say the torsion bars are unevenly adjusted. Your average 180-220 lb. driver will have no effect!
|
DAKOTAKIDD
Dodge Dakota
JOIN HERE
11/24/2002
03:17:03
| RE: front passenger side lower
IP: Logged
Message:
Crank up that passenger side torsion bar until its level.
Easy job..5 mins at the most.
C..
|
FredDQC
Dodge Dakota
JOIN HERE
11/26/2002
11:36:34
|  RE: front passenger side lower
IP: Logged
Message:
I have the same problem with my qcab. exactly 1/2 inch lower. I cranked the torsion bars but the problem seems to rely on the chassis itself. no matter how much you crank, you will still have a 1/2 inch difference.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
