| From | Message |
juniordak311
Dodge Dakota
JOIN HERE
7/21/2002
01:00:38
|
 Subject: 4x4 problems
IP: Logged
Message:
I just bought a new QC 02 4x4 and it has the turn dial 4x4 switch on the dash board.I was wondering in anybody has any problems with this set-up?
|
joey
Dodge Dakota
JOIN HERE
7/21/2002
05:01:46
|  RE: 4x4 problems
IP: Logged
Message:
put it in neutral for 4-Lo, for 4-Hi neutral or park doesn't matter.....
wait for the light to turn solid and not blinking over your choice to know it's on.....
-joey
www.geocities.com/jsanz11_dakota
|
Torque
Dodge Dakota
JOIN HERE
7/21/2002
23:52:04
| RE: 4x4 problems
IP: Logged
Message:
I don't have to put it in neutral to switch from 2WD to 4HI. I have a 5spd and if I stay at a constant speed (I only do this when below 35mph), I can just flip the dial to 4HI and it engages just fine. But I do have to come to a complete stop and put it in neutral in order to go from 4HI to 4LO.
|
joey
Dodge Dakota
JOIN HERE
7/22/2002
00:28:32
| RE: 4x4 problems
IP: Logged
Message:
yeah i believe 4-hi you can do it while rolling just a bit or going at a slow speed but it may be bad for the truck you can break something i dunno, i'd rather just stop and switch....i tried reading them manual but the manual said nothing about it...
-joey
www.geocities.com/jsanz11_dakota
|
Knobbyman
*GenIII*
7/22/2002
08:18:48
| RE: 4x4 problems
IP: Logged
Message:
I agree w/ Joey.. If I have a choice I do it while stoped.. Otherwise if I'm already rolling slow.. I just do it in motion.
4-low you have to be in Neutral.
'01 Graphite QC 4x4
4.7 3.55 LSD
4.5" Customized Suspension Lift
305x70x16 GoodYear MT/R's
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
