| From | Message |
arzadon
Dodge Dakota
JOIN HERE
7/10/2002
13:41:39
|
 Subject: Diff?
IP: Logged
Message:
I want to know what kind of differential I have on the front and back of my 92 Dodge Dakota? I've heard that it was a Dana 30 or 35. I don't know. All I know is that its a 8.25 ring gear. Can anyone tell me what kind of axles I have?
|
Tony
Dodge Dakota
JOIN HERE
7/10/2002
16:38:23
|  RE: Diff?
IP: Logged
Message:
8.25 ring gear!?! HA...No that's not what that is. That is your rear diff size. Your gearing could be 3.55 or 3.90. I think those were the options back then and still are. Your front I believe is a DANA 35. I know it gets kinda confusing with all the numbers. You'll get the hang of it.
Tony
|
arzadon
Dodge Dakota
JOIN HERE
7/11/2002
04:16:34
| RE: Diff?
IP: Logged
Message:
Tony,
I have 3.90 gearing in the rear diff. If the front diff is a 35, then what is the rear diff?
|
tony
Dodge Dakota
JOIN HERE
7/12/2002
00:17:47
| RE: Diff?
IP: Logged
Message:
Your rear diff is a chrysler corporate 8.25"... Front is a DANA 35. If you have 3.9 in the rear you must absolutely must must must have the same gearing in the front. Think about what would happen if they were different and in 4 wheel drive... Your back or front would spin more than the other when everything should be turning in unison without resistance. If it was not, you could kiss your drivetrain good bye.
Tony
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
