| From | Message |
blackbeauty
GenIII
 
9/06/2003
04:40:31
|
 Subject: Cams for 4.7L????
IP: Logged
Message:
Does anyone know of performance cams for the low rpm torque range for the 4.7L V8? I've seen mentioned the HO cams. Are these Mopar cams or what? Where can I find them. I've found absolutely nothing on the 4.7L engine. What's new?????
clean&shiny is good, mud&dirt is better
|
SmokinSport
GenI
11/04/2003
18:59:55
| RE: Cams for 4.7L????
IP: Logged
Message:
Check out Krcperformance.com they have a couple of cams for the 4.7. Ive been eyeing them for some time now but not ready to shell out the cash.
Hope this helps!
|
JeffW
DakotaEnthusiast
5/28/2005
07:36:17
| RE: Cams for 4.7L????
IP: Logged
Message:
The HO cams are a Jeep item. Type HO cams into the searrh box at the top of the page & be prepared to be overwhelmed with info.
'02 Sport 4.7 auto, Gibson exhaust, homebrew K&N cold air, 275/60 BFG Radial T/A's, Infinity CD w/Pioneer & Infinity spkrs & Kenwood powered sub.
|
Travis
GenIII
4/01/2006
16:14:31
| RE: Cams for 4.7L????
IP: Logged
Message:
I looked and looked, anyone know part #'s for those cams and intake from Jeep. The guys I am dealing with in Northern Calif are not really up to speed. Thanks
00,CC,SLT,4.7,Auto,4X4,3" Catback w/Pro Flow Muffler, TPS@.801VDC, Home brew cold air intake, 3" PA Body Lift
|
b1llyw
*DakotaEnthusiast*
4/08/2006
06:54:18
| RE: Cams for 4.7L????
IP: Logged
Message:
Travis, here's out site:
http://www.krcperformance.com
Give us a call and we can help you out.
Bill White - KRC Performance
New Truck On Way
|
Travis
GenIII
3/15/2007
10:44:21
| RE: Cams for 4.7L????
IP: Logged
Message:
Hey you know I called crane cams and they will regrind mine(both) for 298.00 and only a week turn around. Why are yours 749.00, the box on your web page says crane on it. You must pay the same as me, or less if your doing a lot of volume.
00,CC,SLT,4.7,Auto,4X4,3
|
b1llyw
GenIII
3/15/2007
10:46:55
| RE: Cams for 4.7L????
IP: Logged
Message:
The difference is the cams themselves. Yes, you can re-grind on stock cores but with minimal gains. Our cams are ground off of 4.7 HO cores, which allows us to produce a more aggressive design and much stronger numbers.
Bill White - KRC Performance
|
Travis
GenIII
3/15/2007
11:40:47
| RE: Cams for 4.7L????
IP: Logged
Message:
I see. Not trying to cause problems. I know your TB's and other stuff is cheaper then Summit Racing even, and they are pretty cheap. Just asking.
00,CC,SLT,4.7,Auto,4X4,3
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Required
Posting: Registered Users and Administrators only
|
