| From | Message |
Matt
Dodge Dakota
JOIN HERE
2/18/2003
21:20:04
|
 Subject: how can i drop the front more than 2"???
IP: Logged
Message:
alright, i have decided to use DJM 4" hanger/shackle kit. Now i'd like to drop the front 3" in the front. if i got 3" coils, it would only drop it 2". what should i get???? thanks guys,
Matt
|
jim
Dodge Dakota
JOIN HERE
2/20/2003
18:01:09
| RE: how can i drop the front more than 2"???
IP: Logged
Message:
what year truck? i have a set of drop spindles im selling that will drop the front 3", but it is for a 92-96 dak.
my email is: realdeal197310@netscape.net
|
Joey
Dodge Dakota
JOIN HERE
2/21/2003
17:00:16
| RE: how can i drop the front more than 2"???
IP: Logged
Message:
There is something else u can change which will take it down another inch or 2 but i forget wat its called. spindles maybe? however, its not very good cause it makes ur turning radius much larger. id go for some low profile 40 series tires and that will drop it about a little over an inch. im actually gonna get the 17in viper rims and tires for my r/t, it should look real hot and give a lot more traction.
|
kotart13
Dodge Dakota
JOIN HERE
2/21/2003
21:00:45
| RE: how can i drop the front more than 2"???
IP: Logged
Message:
im guessing you have a r/t, otherwise the 3 inch drop coils would drop you 3 inches...
control arms are the way to go lower (no spindles for genIII's) and they DO make your turning radius larger.
its either spindles or cutting your springs.... i wouldnt cut, but thats me...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
