| From | Message |
Brent
Dodge Dakota
JOIN HERE
2/12/2003
19:24:25
|
 Subject: ? About installing coil spring HELP!!!
IP: Logged
Message:
I put on my front springs and back leaf springs. 2/3 Hotchkis Drop total, the front sits higher. But it sits higher on the driver side than the passenger side. Is there certain grooves that the coil springs have to go in order to work. The truck looks bad it is like I am driving around with a load in the back all the time. If you would like to see pics please e-mail me and I will send you one. I would really like to get this problem fixed. smith9_2002@yahoo.com
|
rick sikes
Dodge Dakota
JOIN HERE
2/12/2003
23:36:14
|  RE: ? About installing coil spring HELP!!!
IP: Logged
Message:
you are not sitting in you coil bucket or you coil cushion is in the way. redo that side. what year do you have and please do send the pic
|
kevster
Dodge Dakota
JOIN HERE
2/13/2003
21:17:42
| RE: ? About installing coil spring HELP!!!
IP: Logged
Message:
Brent, Brent... you need to drop the spring on the driver side again, and set it in the lwr control arm correctly, look downn iin the control arm, see the worm hole type groove, it stops on one side, this is where the coil spring end fits into. make sure the opposit side spring is in also, just jack up the truck from the frame and let the wheels hang , now look into the lwr control armm with a bright light, can you see where the spring end meets the worm hole stop?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
