| From | Message |
bash
Dodge Dakota
JOIN HERE
2/13/2005
03:23:58
|
 Subject: RE: 3/5 with 275/45/20's
IP: Logged
Message:
haha, yeah the hangers and shackles are just that , an extension like they are just longer from top to bottom and let the leaf spring sit at a lower position. let me know how your rear rides asap cuz i wanna make sure thats what my problem is
|
wow
Dodge Dakota
JOIN HERE
2/13/2005
04:07:08
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
Guys say no to drugs...I don't know where to start...you have to move the spring UP to lower a truck...the shackle would be shorter not longer... the hanger REPLACES the factory hanger. The new one moves the spring mounting point higher...the idea is to move the axles CLOSER to the frame...please don't narrow your rear end by cutting and welding...maybe you shouldn't drink the bong water. You absolutely should not be touching your trucks with tools
|
bash
Dodge Dakota
JOIN HERE
2/13/2005
12:27:01
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
does my truck look like i did it myself? i can go downstairs and grab my stock hangers and shackles and show you that they are smaller than the after market ones, if you were right then my truck definitely wouldnt be lower........
|
P Y E
Dodge Dakota
JOIN HERE
2/13/2005
19:11:24
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
Um, no...the aftermarker shackles and hangers are loner. They pull the bottom to the frame. How do they shortan an axel then? STFU.
No, it doesnt look like you did it yourself. It just looks like a 2/5 to me. Maybe the damn rubberband tires you are rollin' on are messing with my eyes, I dunno.
|
bash
Dodge Dakota
JOIN HERE
2/13/2005
19:37:30
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
was half of that to him and half to me that really got me confused
|
duh
Dodge Dakota
JOIN HERE
2/13/2005
21:49:14
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
guys think about what you are saying. Go look at the suspension. How can you make a longer shackle move the axle up twords the frame???? Explain it to me. As for the hanger they aren't longer or shorter. It moves the spring mount up higher on the frame.
To narrow a axle you have to cut it then remachine the splines. The housings can be cut and welded, but not the axle.
|
bash
Dodge Dakota
JOIN HERE
2/13/2005
21:54:20
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
exactly why i just pay for this stuff to get done and not get involved, sorry for my mis understanding
|
lame
Dodge Dakota
JOIN HERE
2/13/2005
21:56:42
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
i love how when someone posts on this website that they need help, all the people are quick to criticize and nobody is willing to help with the problem they just wanna say how stupid you are
|
funny.
Dodge Dakota
JOIN HERE
2/13/2005
22:53:49
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
HMMMM Isn't it funny that bash and lame have the same email address.
I'll agree wow was a little insulting but I think duh corrected some misconceptions
|
bash
Dodge Dakota
JOIN HERE
2/13/2005
23:05:43
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
oh sweet someones using my email address.. YES!!!!
|
P Y E
Dodge Dakota
JOIN HERE
2/15/2005
00:54:28
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
I beleive I said some where (maybe not in this exact post) that I ***THINK*** thats how it's done and also said not to take my word on it. As I said before, I'm trying to learn all I can before going to college. Ya'll being laptop gangsters and talking trash over the internet, which is pathetic might I add, doesn't help me one bit.
I welcome those with actual info and not retardism.
|
Haligan9
Dodge Dakota
JOIN HERE
2/15/2005
03:13:31
| RE: 3/5 with 275/45/20's
IP: Logged
Message:
Guys, while the information provided was correct it could have been communicated in a much better fashon. Don't let a few d!cks ruin you quest for knowlege here.
Hal
|
| | <<Original Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
