| From | Message |
Br88
Dodge Dakota
JOIN HERE
9/05/2004
20:06:19
|
 Subject: Belltech shock prob!
IP: Logged
Message:
I lowered my dodge dakota 99 3/5 with DJM lower control arms and hangers and shackles. I put belltech shocks all around. my problem is that when I put the trcuk up on the lift and put on my front shocks, fluid starts o leak out of them as soonas i set it back on th ground. On my first try one shock leaked so i sent it back and got another one. I was putting the second one on and set the truck back down and the other one went bad. I got the three inch lowered nitro shock too. do any of you guys know what the heck is goin on. any help would be grealty appreciated
|
Noltz
Dodge Dakota
JOIN HERE
9/16/2004
01:08:38
| RE: Belltech shock prob!
IP: Logged
Message:
Fluid leaking from a shock simply means it's a bad shock. So long as you didn't nick the chome shaft in the center, it's a warrany issue. Around here, everyone uses Nitro drop-shocks.
(I've heard of Belltech having problems).
|
Noltz
Dodge Dakota
JOIN HERE
9/16/2004
01:18:38
| RE: Belltech shock prob!
IP: Logged
Message:
Fluid leaking from a shock simply means it's a bad shock. So long as you didn't nick the chome shaft in the center, it's a warrany issue. Around here, everyone uses Nitro drop-shocks.
(I've heard of Belltech having problems).
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
