| From | Message |
catron
Dodge Dakota
JOIN HERE
12/28/2003
02:00:57
|
 Subject: for sale air ride tech. air bar 4 link
IP: Logged
Message:
air ride technologies bolt on air-bar parallel 4 link fits 1997-2001 dodge dakota less shocks retailed for $1400 used at $500 email at DhCat@msn.com
|
low4c
Dodge Dakota
JOIN HERE
12/29/2003
00:09:50
|  RE: for sale air ride tech. air bar 4 link
IP: Logged
Message:
hey do u have them off the truck? throw a pic up of the parts set out and ill throw u an offer. they in good shape? why are you sellin them?
|
catron
Dodge Dakota
JOIN HERE
12/30/2003
00:38:26
|  RE: for sale air ride tech. air bar 4 link
IP: Logged
Message:
Yes the links are off the truck, they are in good shape, but I presently do not have a picture, but I will get one and figure out how to post it. The reason I am selling it is that I cut my truck in half installed huge frame notch to put frame on ground shop that did work created a custom triangulated 4 link. you can see the kit at manufactures web site www.ridetech.com this is a 100% bolt on kit very easy to install, quality components.
|
low4c
Dodge Dakota
JOIN HERE
1/04/2004
00:24:58
| RE: for sale air ride tech. air bar 4 link
IP: Logged
Message:
yeah go ahead when u get some pics if u can,and email them to me, kelly_whitaker@csaa.com . so did the air bar or panhard bar fit nicely? how is ur suspension during movement. i have been told that the parallel link creates side to side movement. does or did it interfere w/ ur exhaust?
|
low4c
Dodge Dakota
JOIN HERE
1/04/2004
00:28:08
|  RE: for sale air ride tech. air bar 4 link
IP: Logged
Message:
just asking because i am not familar w/ air ride and plan on puttin the money down quick. i am leaning toward the tri- 4 link though. any advice or suggestions on what the ride is like would help
|
catron
Dodge Dakota
JOIN HERE
1/06/2004
01:08:31
| RE: for sale air ride tech. air bar 4 link
IP: Logged
Message:
parallel link set up requires panhard bar to eliminate side movement, with any air ride set up with bags located below the bed the exhaust will be an issue, cut off below, ride with bags depends on set up, this kit uses an roling sleave bag very supple ride, if you go with double convoluted bag you will be better of installing it under leverage on one of the link arms (custom tri 4 link), if you mount on top of axel with bridge notch the ride will be very stiff, these trucks are very light in back, best to figure out how much drop you want, then determine best way to get it,if you go custom tri 4 link you might have to get creative with link arm placement due to location of gas tank unless you go with a 2 forward 2 rearward set up, or relocate gas tank
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
