Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
08:12:40 - 04/25/2024

Lowered / Slammed Dakotas
FromMessage
rabbit
Dodge Dakota
JOIN HERE


6/22/2003
23:49:22

Subject: 1 to 1.5" rear drop
IP: Logged

Message:
I am looking to lower my 00 2wd Dak 1 to 1.5" and I am wondering what is the best way to do it? I have seen lowering blocks but am worried about axle hop etc. Maybe with only a 1" block that isn't so much of a problem? Now I come across a rear shackle kit on e-bay and wonder if this is the way to go?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33586&item=2420198850

Would I need anything else besides this kit?



Matt
Dodge Dakota
JOIN HERE


6/23/2003
09:19:23

RE: 1 to 1.5
IP: Logged

Message:
1" blocks shouldnt ride too rough. If u went with 2" or 3", it might ride rough then. I'm pretty sure 1" blocks wont though..

As for the hangers on ebay, those should give u a 1" to 1.5" drop. Hangers ride alot better than blocks but they tend to lean on turns (my 3" hangers did). But if i was gonna choose between the two, I'd go with the blocks because they are usually cheaper and easier to install. Unless those hangers go for under $50, i'd get the blocks. Hope this helped,

-Matt



kotart13
Dodge Dakota
JOIN HERE


6/23/2003
12:21:27

RE: 1 to 1.5
IP: Logged

Message:
you also have to think of how much work is involoved to install those hangers, just for a 1 or 1.5 i dont think it would be worth it. not that its something you couldnt install, but hangers are a PITA. if you dont know what im talking about, go out to your truck and look at where the gas tank is located...



juniork
Dodge Dakota
JOIN HERE
 Email

6/25/2003
04:20:49

RE: 1 to 1.5
IP: Logged

Message:
Putting the hangers on is a PITA, that is why I am selling them on Ebay.
I put the 2" drop hangers on, went to do the front hangers and looked at the gas tank. I decided to lower it 2" more with the blocks instead.



black99dakota
Dodge Dakota
JOIN HERE
 Email

6/26/2003
20:35:51

RE: 1 to 1.5
IP: Logged

Message:
I have 1" lowering blocks in the rear right now and it rides exactly the same as stock. it still sits a tad higher in the back but looks a lot better than stock.



sildak
Dodge Dakota
JOIN HERE
 Email

7/11/2003
21:45:04

RE: 1 to 1.5
IP: Logged

Message:
just removed 2 inch blocks noticed trans was leaking 5 speed manual. not sure if this is problem but do not want to void waranty.takeing in for service next week.i do a lot of gtech runs started to have a problem getting in to 2nd on speed shift did not have be for. had blocks in for about two weeks be for problem started.


2003 cc 4.7 5 speed
392 lsd
dynomax one in two out 2.5 inch
275/55/17 dunlop sp 5000 on einkes




   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.