| From | Message |
tony suon
Dodge Dakota
JOIN HERE
1/28/2002
15:46:20
|
 Subject: dropping my durango
IP: Logged
Message:
whats the best way to get a 2 inch drop up front and a 3 inch in the rear for my 2000 2wd v8 durango? im looking to spend about 600 bucks
|
casdak
Dodge Dakota
JOIN HERE
1/28/2002
19:13:45
|  RE: dropping my durango
IP: Logged
Message:
Go to www.sporttruckdirect.com. Western Chassis has a set of 2" dropped control arms for Dakotas and Durangos. They cost around $250 bucks a pair without ball joints, or $320 bucks with the ball joints. I'm sure that they will have a 3" or 4" drop for the rear of your Durango. Later, man.
|
D
Dodge Dakota
JOIN HERE
1/28/2002
20:33:06
| RE: dropping my durango
IP: Logged
Message:
DJMsuspension.com about $550 from djm, I
would check with godfathercustoms.com for a
better price...for some reason, the distributors
are cheaper than buying direct from the
manufacturer.
http://www.djmsuspension.com/Products/
ProductsByMake/Dodge/DurangoParts.htm
|
tony suon
Dodge Dakota
JOIN HERE
1/28/2002
22:26:29
| RE: dropping my durango
IP: Logged
Message:
would there be any big problems if i used hotchkis
2 inch springs up front, and hotchkis 3 inch leafs in the back? or should i really consider using arms instead.
|
D
Dodge Dakota
JOIN HERE
1/29/2002
22:20:37
| RE: dropping my durango
IP: Logged
Message:
does hotchkis make a durango kit? if so, I
would go with that (if you want performance) if
you want to lower your durango w/o sacrificing
ride I would change the lower control arms,
and keep the stock coils in (I put 3" djm
control arms on my dak and 5" shackle
hangers in the rear w/ an extra 1" block.) Ride
is slightly different because of the stiffer
shocks, but overall, a nice smooth ride, with
barely any tire rub (only over bumps at high
speeds...85+)
D
01/4.7/CC3.55/airaid/TBspacer/Dynomax3"/
180stat/JetStage2/DJMdrop3-6/pegleg
|
tony suon
Dodge Dakota
JOIN HERE
1/30/2002
00:18:27
| RE: dropping my durango
IP: Logged
Message:
im probably gonna go with the 2 inch drop western chassis arms, and hotchkis 3 inch leafs and just keep the stock springs all around? what do you guys think of the edelbrock ias shocks?
|
jim
Dodge Dakota
JOIN HERE
4/12/2004
21:32:53
| RE: dropping my durango
IP: Logged
Message:
i would like to know where i can see the latest body kits and rims for my 2003 durango.are rear wings available and which is better on the durango hydraulics or air bags
|
kotart13
Dodge Dakota
JOIN HERE
4/13/2004
19:47:48
| RE: dropping my durango
IP: Logged
Message:
stock springs all the way around - do you mean shocks? the ride would be semi-rough, depends on how much you can take. i wouldnt see a problem with hotckis coils on the durango, same setup as dak, and the added stiffness could only help the SUV roll.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
