| From | Message |
DakSport
Dodge Dakota
JOIN HERE
3/26/2003
19:27:17
|
 Subject: DJM 3/5 Control arm adjustment bolt
IP: Logged
Message:
I was reading the instructions and it says that the kit may require enlongating the upper control arm adjustment bolt holes of the upper control arm. Has anyone had to do this? Or is it a good idea. Please let me know plan on doing this, this weekend.
Thanks,
Ryan
|
DakSport
Dodge Dakota
JOIN HERE
3/26/2003
19:30:38
| RE: DJM 3/5 Control arm adjustment bolt
IP: Logged
Message:
Oh ya i have the lower control arms and hanger and shackle kit.
Thanks
|
BlackDak20
Dodge Dakota
JOIN HERE
3/26/2003
23:40:02
| RE: DJM 3/5 Control arm adjustment bolt
IP: Logged
Message:
You wont have to. I didnt have to on my truck and the alignment is fine. I have heard some people cannot get the alignment right, that is supposed to fix it. My alignment is nearly perfect and I have had no problems with tire wear or anything like that. So I dought you will have to do that.
|
DakSport
Dodge Dakota
JOIN HERE
3/28/2003
17:39:56
| RE: DJM 3/5 Control arm adjustment bolt
IP: Logged
Message:
thanks for the input. As for your rims/tires are you talking about the stock 15's? or shouldnt it make a difference?
|
BlackDak20
Dodge Dakota
JOIN HERE
3/28/2003
19:05:13
| RE: DJM 3/5 Control arm adjustment bolt
IP: Logged
Message:
I have the stock 16's on my truck, they have a taller tire but I dont think it really makes a difference because its not the tire they are necessarily lining up, its the spindle..... if that sorta made sense.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
