| From | Message |
Ray R/T
Dodge Dakota
JOIN HERE
3/14/2003
21:52:33
|
 Subject: Pictures Of My Lowered R/T
IP: Logged
Message:
Below are 2 links of my freshly Lowered R/T. It is a 2000 Intense Blue Club Cab. I bought it used about 2 years ago and was my daily driver. I thought I was putting too many miles on it so I was going to sell it and buy a commuter truck. Well, I did buy a commter truck and was detailing my R/T to get it ready to sell. Well, after a few coats of wax I thought how great it would be not to have to drive it everyday. Needless to say I decided to keep it. But if I did keep it I needed to Lower it so I did. I used 3" drop coils in the front and 4" blocks in the rear. The rear does sit a little low for the front so I'm going to change the rear to 3" blocks. Thanks. http://images.prosperpoint.com/images/689/35451-650.jpg http://images.prosperpoint.com/images/689/35451-649.jpg
|
93venom
Dodge Dakota
JOIN HERE
3/15/2003
01:55:16
| RE: Pictures Of My Lowered R/T
IP: Logged
Message:
looks good man, what brand coils did you use?? and if those are pics right after you dropped it drive it around for about 500 miles to let the coils settle in, should settle about another half inch..looks nice though....i want to go with 2 inch arms and 3 inch coils, so if you can let me know what brand you used that would help me out
|
Matt
Dodge Dakota
JOIN HERE
3/15/2003
22:47:09
| RE: Pictures Of My Lowered R/T
IP: Logged
Message:
hey 93venom,
have u lowered your R/T 4"-5"? if so, did u use 2" a-arms and 2" coils? i bought 2" a-arms and i was going to buy 2" coils but i had a few questions before i would buy them. hey whats your email? thanks
Matt
fatmat789@yahoo.com
|
LIL DQ
R/T
3/16/2003
01:35:03
| RE: Pictures Of My Lowered R/T
IP: Logged
Message:
Here's my baby...
Hope to have some new pics of her today at the car show at Ranken Technical College in STL...
Doc
02 CC R/T slightly modified
I know, I know, pull over!
|
93venom
Dodge Dakota
JOIN HERE
3/16/2003
05:11:56
| RE: Pictures Of My Lowered R/T
IP: Logged
Message:
no, i havent lowered mine yet, i want mine to tuck so im cutting the inner fenderwells out up front, and in the process of redoing the fenders in the bed, dont want it bagged just tuckin-i was going to go with 2 inch arms and hotchkiss springs...but now i want to go with the arms and 3 inch belltech springs and in the rear 3 inch leafs and 3 inch blocks with a notch...the fenderwells being cut out will allow me to run a taller tire and get it to go up in the well...no lopros for me. ill post pics when its done....
matt....as far as 4-5 drop go with 2 inch arms and 2 inch coils and like a 245-50 or 245-55 or something around there...
|
Matt
Dodge Dakota
JOIN HERE
3/16/2003
08:02:02
| RE: Pictures Of My Lowered R/T
IP: Logged
Message:
93venom,
i just dont want my tires to rub all the time. maybe every now and then would be alright, just not everytime i drive it. i dont remember my tire size, its the factory tires that come on the R/T. the goodyear tires. thanks
Mat
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
