Forums
Forum Tools
|
 |
12:40:00 - 04/25/2024
General Dakota Board
| From | Message |
Geoff
GenIII
11/13/2002
18:16:18
|
 Subject: Where to buy Carbon Fiber???
IP: Logged
Message:
Where in tyhe world can i get small amounts of 1/16" thick Carbon Fiber sheet stock
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, JBA Headers
|
DaveR
GenII
11/13/2002
19:58:18
| RE: Where to buy Carbon Fiber???
IP: Logged
Message:
McMaster Carr
www.mcmaster.com
They have small amounts of all kinds of good stuff.
|
ZenDak
Dodge Dakota
JOIN HERE
11/13/2002
22:09:43
| RE: Where to buy Carbon Fiber???
IP: Logged
Message:
I forgot where I got mine (me and buddy are starting a cf business....eventually).
But just ask for a sample pack - Free.,,and they'll send you a crap-ton of material,,usually in little 6x6 squares,,but it's quite a bit.
|
Geoff
GenIII
11/14/2002
14:21:22
| RE: Where to buy Carbon Fiber???
IP: Logged
Message:
mcmaster was the place thanks
Got two types of what i needed for less then $20
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, JBA Headers
|
DaveR
GenII
11/14/2002
17:28:09
| RE: Where to buy Carbon Fiber???
IP: Logged
Message:
THey are insanely fast too. I have had materials to my door in under 24 hours with ground shipping and in less the 48 hours where I am now. They have warehouses all over.
|
2THEXTRM
GenIII
11/14/2002
17:36:24
| RE: Where to buy Carbon Fiber???
IP: Logged
Message:
what kinda stuff can you make outta the CF pieces? Is it flexible or shapeable?
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Custom Manik Nerfs, Hard Work and $$$$$$$$$$
|
Geoff
GenIII
12/14/2002
02:27:15
| RE: Where to buy Carbon Fiber???
IP: Logged
Message:
I used it to make some custom inlays on some Microtech Knives
as far as its properties think of it as stronger cooler looking fiberglass
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, JBA Headers
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
