| From | Message |
andrew
Dodge Dakota
JOIN HERE
11/11/2002
19:53:19
|
 Subject: i need something from someone here...
IP: Logged
Message:
jusr let me know how much $$$. i have a 93 dakota with 318 and auto trans. i am looking for the connector that goes over the coolant temp sensor for the gauge. not the one tucked up in closest to the Tb but the one you can see by looking down between the alternator and thermostat housing. i have the sensor itself already installed in the manifold, i just need the electrical part that connects to it and is wired to the harness. if anyone would like to part with their, i would appreciate it if you could cut the wire about 6-8" up from the connector. thanks.
|
DakotaDan
*GenIII*
11/11/2002
19:56:09
|  RE: i need something from someone here...
IP: Logged
Message:
Andrew you might check at AutoZone, I have found pigtails for headlights and other ssensors there.
Dan
"Can You Hear Me Now"........................................GOOD !!!!!!!!!!!!!!!!!!!!!!!!!
|
andrew
Dodge Dakota
JOIN HERE
11/11/2002
19:59:43
| RE: i need something from someone here...
IP: Logged
Message:
thanks. i tried the dealership even and they told me no luck on it. i cant figure out what is going on. i would hate to go to a salvage yard and have to buy the entire wiring harness just for one little connector.
|
DaveR
GenII
11/11/2002
20:51:11
| RE: i need something from someone here...
IP: Logged
Message:
Your dak and the newer ones probobly share this sensor. You could try asking them if it is the same part number for a 98 and for a 93. If they say yes see if they can get you a connector for a newer dak. I have had trouble before since the parts counter never seems to understand what cross referencing is. I have fought countless times over similarly hard to find parts. You could also try NAPA.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
