Forums
Forum Tools
|
 |
18:35:33 - 04/25/2024
General Dakota Board
| From | Message |
AustinL911
Dodge Dakota
JOIN HERE
11/08/2002
23:08:15
|
 Subject: Will the rearend hold up?
IP: Logged
Message:
will an R/T rearend hold up to 450+ hp and lotsa trq? especially under drag conditions?
|
kota on 20s
GenIII
11/09/2002
01:29:36
| RE: Will the rearend hold up?
IP: Logged
Message:
well, i was at the dyno when Scott Q laid down 560 RWHP without the 150 shot, and he only pulled to 5200 rpm. the HP was still rocketing upward when he let off. he has not had any problems yet, and he launches HARD and with slicks.
big bird ran a 10.7 on the stock rearend, so 450 hp should not be a problem
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, 3" carsound cat, dumped gibson
|
afi360
*R/T*
11/09/2002
15:37:58
| RE: Will the rearend hold up?
IP: Logged
Message:
i hope i dont snap axles...i think a 12.25 is a modest goal for a daily driver, i just really dont want to swap the axle and stuff....you think itll be alright??
|
kota on 20s
GenIII
11/10/2002
22:04:36
| RE: Will the rearend hold up?
IP: Logged
Message:
it should be fine, but with racing, anything can happen
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, 3" carsound cat, dumped gibson
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
