| From | Message |
North GA Dak
Dodge Dakota
JOIN HERE
11/08/2002
13:32:50
|
 Subject: Repair Manuals??
IP: Logged
Message:
'01 Flame Red QC 4.7
Does anyone know where I can get a repair manual (Haynes, Chilton, etc..) that covers my '01 ?? I have checked these sites and all that I can find is the manuals for the Daks up to '96 or '97. Am I missing something?
Thanks in advance for the help!
Scott
|
xplikt
GenIII
11/08/2002
13:42:17
|  RE: Repair Manuals??
IP: Logged
Message:
What you really need is one of these:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1871761881
-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
North GA Dak
Dodge Dakota
JOIN HERE
11/08/2002
13:49:40
| RE: Repair Manuals??
IP: Logged
Message:
Thanks!
That's more like what I was looking for.
Much appreciated!!
Scott
|
Bill
GenIII
11/08/2002
14:17:23
| RE: Repair Manuals??
IP: Logged
Message:
Here's a site from DC that you can buy all of this kind of stuff:
http://www.techauthority.daimlerchrysler.com
Bill
Bill's Truck Page
ARE Tonneau Cover
Wet Okole Seat Covers
Homebrew Intake and Other Mods Coming Soon!!
|
xplikt
GenIII
11/08/2002
14:25:27
| RE: Repair Manuals??
IP: Logged
Message:
BTW. That manual has specs and info on all 5 different Dakota engines.
-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
North GA Dak
Dodge Dakota
JOIN HERE
11/08/2002
14:39:19
| RE: Repair Manuals??
IP: Logged
Message:
Thanks guys! Very helpful.
Scott
|
Jeffro
Dodge Dakota
JOIN HERE
11/09/2002
01:27:30
| RE: Repair Manuals??
IP: Logged
Message:
Went into the back of owner's manual for my '99 and ordered the DC service manual. This is what dealer (should) have. It was about $90, but well worth it; even tells how to order special tools, etc. The number is 800-890-4038
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
