Forums
Forum Tools
|
 |
15:12:53 - 04/26/2024
General Dakota Board
| From | Message |
Chad
Dodge Dakota
JOIN HERE
9/19/2002
17:21:00
|
 Subject: Stage 1 Throttle body!
IP: Logged
Message:
I have an original Stage 1 F&B TB for sale. This unit was the
predecessor to the famed billet TB that is so popular now. It
essentialy is a stock TB that has been fitted with thinner throttle
blades (blue anodized) and throttle shaft with smaller head screws,
the top has been milled flat which removes the restrictive air horns,
but leaves 4 tabs to make sure the stock air hat fits, and a 7 degree
taper has been machined above the throttle plates to the top of the
TB, and the edges radiused smooth. Very nice unit. COmes with all
sensors.
What I would need in return is your stock TB with sensors attached.
This is a must because my friends Dakota is sitting TB-
less and I need yours to put back on his truck. I bought this TB new
from Bruce at F&B for my 2000 R/T and used it until I sold the truck,
with Mikes stock TB on it and he used my TB until now. This TB will
fit 98-02 5.2 and 5.9 liter engines.
I'm asking $150 US shipped to you, and you send me yours back. If you want to keep yours, I have to charge you a $100 core charge so I can buy another stocker.
It's really not a bad deal considering what a new one costs. It flows 745 cfm compared to 636 cfm of a stock TB at 25" H20, and only 55 cfm less than a billet 50mm TB. These are F&B's own numbers.
Thanks,
Chad
|
Chad
Dodge Dakota
JOIN HERE
9/20/2002
15:02:48
|  RE: Stage 1 Throttle body!
IP: Logged
Message:
No one wants a cheap, ported TB that gave me .4 gain in the 1/4 mile????
|
Chad
Dodge Dakota
JOIN HERE
9/23/2002
15:34:06
|  RE: Stage 1 Throttle body!
IP: Logged
Message:
Anybody?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
