| From | Message |
Joel
Unregistered
4/08/2001
19:35:36
|
 Subject: ECU
IP: Logged
Message:
I'm not sure what the ecu does, but if i get a pcm will it replace the ecu? Reason why i'm asking is because i know the daks ecu have a rev limiter built in them and i'm planning on buying an msd ignition and i'm unsure which one to buy(the 6A or 6AL)???
|
Bernd
GenIII
4/08/2001
21:45:43
| RE: ECU
IP: Logged
Message:
ECU and PCM are basically the same thing (with some minor differences).
ECU = Electronic Control Unit (Basics controls plus a few specific items)
PCM = Powertrain Control Module (Everything on your vehicle)
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
RonW
Gen III
4/09/2001
12:37:33
| RE: ECU
IP: Logged
Message:
You won't need the 6AL. The PCM's in the Daks have rev limiters, even the HP PCM's have them.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
|
Joel
Unregistered
4/09/2001
21:34:18
| RE: ECU
IP: Logged
Message:
hey ron so if i buy an after market pcm ie. hypher tech or mopar those already have a rev limiter built in them?
|
RonW
*GenI*
4/10/2001
01:00:33
| RE: ECU
IP: Logged
Message:
If you get a Mopar, one, then yes,it has a rev limiter. A jet or hypertech, just fools the PCM that's still hooked up so the rev limiter of the original PCM still governs that, I believe.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
