Forums
Forum Tools
|
 |
20:30:25 - 04/26/2024
General Dakota Board
| From | Message |
b1llyw
GenIII
 
9/01/2002
10:36:35
|
 Subject: NV3500 or NV3500HD
IP: Logged
Message:
On a 1995 Dakota, 318, 5 speed, 2wd, would it have a NV3500 or NV3500HD?
Also, what if anything could be done to an NV3500 or NV3500HD to make it handle more power, like a 408 stroker. Obviously, you can upgrade the clutch. I know that would help. What about the guts in the transmission? Has anyone done this?
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 T-Stat, Jet Chip - Stage II
|
kota on 20s
GenIII
9/01/2002
11:51:03
|  RE: NV3500 or NV3500HD
IP: Logged
Message:
i dont think you can do anything to the tranny. you would be better off just trashing the origonal unit, and replacing it with something stronger.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
b1llyw
GenIII
9/01/2002
12:40:11
| RE: NV3500 or NV3500HD
IP: Logged
Message:
What would you recommend replacing it with?
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 T-Stat, Jet Chip - Stage II
|
kota on 20s
GenIII
9/01/2002
15:19:10
| RE: NV3500 or NV3500HD
IP: Logged
Message:
dont know, but a viper 6 speed would be nice ;-) it could handle the torque quite nicely
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Required
Posting: Registered Users and Administrators only
|
|
