| From | Message |
sandman
Dodge Dakota
JOIN HERE
8/14/2002
19:40:40
|
 Subject: CW or Bernd
IP: Logged
Message:
Does DC make an export down pipe or Crossover pipe for the 4.7 liter. I am refering to the pipes that come directly off the exhaust manifold. It would be nice to get some OEm ones with out the converters!!!!
|
CW
GenIII
8/14/2002
21:12:12
|  RE: CW or Bernd
IP: Logged
Message:
I agree. The only way to get them without the little convertors is to order the one with only the main convertor. It isn't cheap $300 if I remember correct. I think what I will do is build a custom Y-pipe without the convertors. I was thinking 2¼" Y-pipe going into a 3" main all the way to the tailpipe. You can buy a flowmaster Y-connectors for about $40. I just need the money for all this. I am thinking of getting my cams reground as well. I am getting ancy for more power.
2001 4.7HO RC 5sp 3.92 LSD
Click on thumbnail for mods
|
D
Dodge Dakota
JOIN HERE
8/14/2002
21:52:49
|  RE: CW or Bernd
IP: Logged
Message:
CW: are you going to get the stock cams
reground, or the HO cams? I wonder if I
should get the HO cams ground before I
install them?
|
sandman
Dodge Dakota
JOIN HERE
8/14/2002
21:59:21
| RE: CW or Bernd
IP: Logged
Message:
I was think about custom fabing some as well. If I have to make my own I will make them out of stainless steel. I live in Michigan so car cancer is always in my equation. Heck I might as well make my mufller as well. It is not that hard to copy flowmasters delta design.
|
CW
GenIII
8/14/2002
22:28:21
| RE: CW or Bernd
IP: Logged
Message:
D: I was going to regrind the stockers. You can regrind yours but you have to provide specific specs for them to grind to. You can pretty much do what ever you want to the exhaust but the intake is a little unknown because I have no idea how far you can go before piston contact becomes a concern.
2001 4.7HO RC 5sp 3.92 LSD
Click on thumbnail for mods
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
