Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
21:21:14 - 04/17/2024

General Dakota Board
FromMessage
Matt
Dodge Dakota
JOIN HERE
 Email

8/13/2002
22:48:09

Subject: Intake done, One question though.
IP: Logged

Message:
I put in a new intake. K&N with 3" abs just like everyone else did. I noticed that the truck is a little louder. BUT I don't think I notice a difference in the speed. Is it just me? Does it take a few hours of driving for the computer to learn or anything like that? If I were to add a new free flowing muffler would that help out too? Right now it is a stock exhaust 2002 V8 4.7 club cab. Thanks!



Jared
Dodge Dakota
JOIN HERE
 Email

8/13/2002
23:04:55

RE: Intake done, One question though.
IP: Logged

Message:
I also just finished my 3" PVC intake, but i used a bigger filter than everyone else, so i had to "modoify" anthony's design My truck already has 2 flowmasters and th third cat is removed I hd the airaid on it but i pulled itbecause it is junk IMO. I can tell a little difference, but it does take the 4.7's a while to recognize modifications...longer than the other magnums I hear.

Hope this helps a little
Jared



Bob W
GenIII
 User Profile


8/13/2002
23:16:36

RE: Intake done, One question though.
IP: Logged

Message:
The stock 4.7 intake is as about as good as it gets for performance.

Gibson headers, Gibson Cat-back, Edelbrock IAS shocks, K & N drop in, 180 stat, Jet stage II chip, ARE Lid

Big Blue QC
GenIII
 User Profile


8/14/2002
07:56:58

RE: Intake done, One question though.
IP: Logged

Message:
I agree with Bob W. For grins I was going to try taping off the air baffles in the airhat at the throttle body to see what happens. The stock intake also gets its air from the cowl area at the top of the passenger side fender, which provides for higher air pressure than trying to get direct air through the front grill. Remember cowl induction on the old Chevelles? At least that is what I think, I am sure there are lots who will disagree.

2002 QC 4x4 Sport Plus, 4.7L, auto, Patriot Blue, Tire & Handling group,
Heavy Duty Service group, Leer cap w/out windows, Mopar Step bars and roof rack, Rhino liner in bed and on step bars, Pace Edwards Power Tailgate lock
3.55 rear, 4-wheel anti-lock brakes, all possible fluids are AMSOIL

CW
GenIII
 Email User Profile


8/14/2002
09:27:35

RE: Intake done, One question though.
IP: Logged

Message:
The air intake is a mod to be done down the road. The 4.7 isn't really that hard to get performance out of. Just ask Matt Barret 242 RWHP with his 4.7. That is far from stock.

2001 4.7HO RC 5sp 3.92 LSD

Click on thumbnail for mods

JorDak
Dodge Dakota
JOIN HERE
 Email

8/14/2002
10:33:58

RE: Intake done, One question though.
IP: Logged

Message:
I got an immediate, noticeable increase in performance once I put on the 360 intake.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.