| From | Message |
JM
Dodge Dakota
JOIN HERE
6/04/2002
19:28:36
|
 Subject: Which fuse?
IP: Logged
Message:
This isn't really a big deal but I was wondering which fuse controls the light ring around the ignition switch and which one controls the dash light for the seat belt? Ever since I bought my truck neither one have lit up. Just curious.
Thanks,
J
2000 CC 4x4, 4.7L auto
|
Todd W
GenIII
6/04/2002
22:54:46
|  RE: Which fuse?
IP: Logged
Message:
There is a dash light for the seatbelt, and the ring is supposed to light up?!
Mine never has either... hmm... wonder if there are even bulbs in there...
'00 RC Sport Forest Green, 3.9L, 5-speed 3.55, Hurst Comp-Plus Shifter, Clear-Corners, Speed-Glo gauges, Airaid Intake with relocated IAT, Autolite 3923s, Ported Throttle Body, Borg & Warner Cap/Rotor, Accel Coil, JBA 9mm Wires, JET Stage II
|
Melinda
Dodge Dakota
JOIN HERE
9/22/2002
09:15:37
|  RE: Which fuse?
IP: Logged
Message:
In my 93 V6, it's not a fuse but a relay that controls the light ring (and the floor light that goes off a few seconds after you shut the doors). It is the smaller of 2 silver cylindrical devices in the fuse panel. If you have your manual, its referred to as "timed delay" or something close to that.
Found mine because it was hot to the touch when I was messing wiht the fuse panel. This was becasue I'd had the door open of an extended period of time, messing with the fuses.
Hope this helps!
|
Halo3
GenIII
9/22/2002
12:38:52
| RE: Which fuse?
IP: Logged
Message:
JM
While I cannot really answer your question on either of these, I do want to ask if your ignition halo ever worked? In a cost-savings effort, DC slowly quit wiring up a LOT of these little niceties in the '99-'00 model years, and I think the ignition halo was the first one to go...followed by the ash tray light, front cup holder light (might only have existed in the Durangos), console light, etc.
Semper Fi,
Halo3
'00 Lt. Driftwood 4x4 SLT DQC w/5.9L
Halo3's Dak
|
Billy
Dodge Dakota
JOIN HERE
3/31/2003
22:56:35
|  RE: Which fuse?
IP: Logged
Message:
I haven't had a problem with the ring, but my seatbelt warning light WILL NOT go out. Has anyone else had this problem??
|
Halo3
GenIII
4/01/2003
08:30:44
|  RE: Which fuse?
IP: Logged
Message:
I had that problem in my old Ranger. Initially, I could unbolt & unplug the female end of the seat belt & hose the inside out with electrical contact cleaner, but, eventually, the switch therein went completely out. I ended up going to a Pick-and-Pull, and walked out with a scavenged buckle for $8....worked great for the remaining four years that I had the truck.
Hope that helps...
Semper Fi,
Halo3
'00 Lt. Driftwood 4x4 SLT DQC w/5.9L
Halo3's Dak
|
Texas Todd
Dodge Dakota
JOIN HERE
4/01/2003
08:39:29
| RE: Which fuse?
IP: Logged
Message:
So, A 2001, slt Quad, should, or could have the halo light on the key?
Why, oh why would DC discontinue such a simple, small thing.
I guess I should be glad that my SLT came with the thick, under hood insulation with the Ram head imprinted under the hood! I heard they nixed that one also.
|
jaggy
GenIII
4/01/2003
12:01:46
| RE: Which fuse?
IP: Logged
Message:
my 02, has none of that crap you guys are discribing. and no freakin light under the hood.
How can you not have a light under the hood?!?!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
