| From | Message |
kamran
Dodge Dakota
JOIN HERE
3/22/2002
10:55:28
|
 Subject: High back cap for Quad Cab
IP: Logged
Message:
Hi all! I have a 2002 4.7L Quad Cab and I'm looking for a cap for it. It has to be a high back cap though so I can fit my ATV in the back. The regular cab high caps are too low. I've been told that nobody makes a high back for the Quad Cab because it doesn't look good since the bed is so short. Is that true? I hope not. If it is I'll have to go with a torneau cover and just remove it when I need to load up the ATV. I am also a drummer so I transport my drums in the bed, otherwise I wouldn't put anything on it because the ATV doesn't really need to be covered during transport, but the drums do.
That is my dillema.
thanks!
-kamran
BTW, Dodge Dakotas rule!
|
CAP
Dodge Dakota
JOIN HERE
3/22/2002
12:33:04
|  RE: High back cap for Quad Cab
IP: Logged
Message:
Try the ARE Site (www.4are.com)
They do have taller caps available for the dakota.
Is this tall enough ?
|
Tim S.
Dodge Dakota
JOIN HERE
3/22/2002
12:36:01
|  RE: High back cap for Quad Cab
IP: Logged
Message:
I have seen a Quad with a pretty high cap on it.
It was aluminum and it was UUUUGGggLLLLYYY!!!
The front edge of the cap was quite flat and it looked like it would catch a whole bunch of air.
Maybe he made it, but it looked factory.
If I see it again I will try to find out more info.
Good luck!!
Tim S.
|
kamran
Dodge Dakota
JOIN HERE
3/22/2002
12:43:56
| RE: High back cap for Quad Cab
IP: Logged
Message:
Thanks for the replies!
After I posted my question I stumbled across the A.R.E website. Yes, the A.R.E MX series would probably do the job. I also found out that Jeraco makes one similar to the A.R.E that would probably work. They're both in the same price range $900-$950.
Any comments on quality, Jeraco vs. A.R.E.?
thanks,
-kamran
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
