| From | Message |
Brian
Unregistered
3/08/2001
22:38:23
|
 Subject: Fog Light Installation
IP: Logged
Message:
I ordered some fog lights and I was wondering if anyone had any information on installing them or if they know of any good websites that show how to. Any help will be apprechiated. Thanks.
|
ttt
Dodge Dakota
JOIN HERE
11/12/2003
16:08:12
| RE: Fog Light Installation
IP: Logged
Message:
........ on the truck.
|
Karl
Dodge Dakota
JOIN HERE
11/12/2003
23:00:18
| RE: Fog Light Installation
IP: Logged
Message:
I installed 'Pilot' fog lights on my truck last month. They came with a good wiring harness and easy to understand instructions. The brackets fit perfectly. You should have no problems.
Karl
2002 Dakota Sport v6 cc
|
Chad
Dodge Dakota
JOIN HERE
4/12/2005
15:19:25
| RE: Fog Light Installation
IP: Logged
Message:
I have a 99 Dodge Dakota, It has no fog lights installed on it. I wan't to install a set. What do i have to do to fit them in there. What kits do i need and do i need to cut two holes in my bumper.
|
Kaderdak
GenIII
4/12/2005
17:07:35
| RE: Fog Light Installation
IP: Logged
Message:
The foglights I bought on ebay came with nothing but two lights and a wiring harness. I had to make some mounting brackets that bolted up on the underside of the front bumper to mount the lights onto so they would set right in the holes. I also drilled a small hole in my firewall to run the wires into my dash and mounted a small toggle switch by the headlight switch for the foglights. I'm pretty sure my truck was not setup originall for foglights, I had to basically do it from scratch.
** '97 Dakota 5.2L 4x4 w/3.55(my best ebay purchase yet) **
** Homebrew CIA, Dynomax Catback, March Underdrive Pulleys, Transgo Kit **
** Borg Warner Brass Cap/Rotor to Taylor 8mm wires to NGK plugs **
** Homebrew dual electric fan setup with 180* thermostat **
** Sitting on BFG 31 x 10.50's **
** Tons more once I'm not a poor college student :) **
|
another mark
Dodge Dakota
JOIN HERE
4/12/2005
20:38:42
| RE: Fog Light Installation
IP: Logged
Message:
Chad you are gonna have to cut holes in your fascia. You can find a hole saw that size I'm sure. Get the stock fog lights from the dealer and if I remember right they bolt to the bottom of the bumper.
|
Chad
Dodge Dakota
JOIN HERE
4/12/2005
21:44:02
| RE: Fog Light Installation
IP: Logged
Message:
Hey thanks Mark. I have another question will this set of fog lights work instead of the stock ones from the dealer.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7966793473&category=33709
It a little cheaper. Do you know if they are just as good or just a dirt cheap model??
|
another mark
Dodge Dakota
JOIN HERE
4/14/2005
19:23:43
| RE: Fog Light Installation
IP: Logged
Message:
Chad those will work if they are the right size for the holes you will be making.
Personally, I put a Street Scene front fascia on my truck and it had square holes for the fog lights. I found a company that made lights that exact size and I made my own brackets from scratch.
If you are handy with some basic tools and have a hardware store nearby, you are set.
|
boomer
Dodge Dakota
JOIN HERE
9/05/2005
22:10:04
| RE: Fog Light Installation
IP: Logged
Message:
I noticed my dakota already has a foglight harness for the optional stock foglights and i was wondering if i could just wire in the lights i have into that harness. i know im going to need the switch that plugs into the harness in my dash by the headlight switch and a fuse for the foglights.
|
Dan M
Dodge Dakota
JOIN HERE
9/05/2005
23:12:29
| RE: Fog Light Installation
IP: Logged
Message:
A word of caution. Some states have laws about fog lights that say they have to disengage when the bright lights are on. Some do not. I saw somewhere on here someone failed inspection because they isntalled fog lights without relaying them to the high beams.
- Dan M
|
P Y E
Dodge Dakota
JOIN HERE
9/06/2005
00:38:13
| RE: Fog Light Installation
IP: Logged
Message:
Some one should really give us a "HOW TO" on building a fog light bracket from scratch. I've had these 4" Angel Eye fog lights and my holes cut out for months. lol.
|
joey
Dodge Dakota
JOIN HERE
9/18/2005
16:51:14
| RE: Fog Light Installation
IP: Logged
Message:
pull my finger feeesher
|
Sasha
Dodge Dakota
JOIN HERE
7/18/2006
03:56:16
| Sasha
IP: Logged
Message:
"Cool design. Keep up the good work. Good job guys!
|
MR.Bob
Dodge Dakota
JOIN HERE
7/27/2006
12:49:11
| MR.Bob
IP: Logged
Message:
"I really enjoyed looking at your site, I found it very helpful indeed, keep up the good work.
|
Jack
Dodge Dakota
JOIN HERE
8/04/2006
15:15:52
| Jack
IP: Logged
Message:
"Nice site. I had a bit of trouble with loading some of the pages, but maybe that's just because I use a non-standard browser.
|
Sara
Dodge Dakota
JOIN HERE
8/05/2006
00:36:14
| Sara
IP: Logged
Message:
"Regards by Very well job here with that website! Congratulations, I love it very much. I really appreciate your work here.
|
Jan
Dodge Dakota
JOIN HERE
8/06/2006
03:51:35
| Jan
IP: Logged
Message:
"Cool design. Keep up the good work. Good job guys!
|
Daniel Bachynski
Dodge Dakota
JOIN HERE
2/11/2011
22:43:20
| RE: Fog Light Installation
IP: Logged
Message:
Recently purchased a brand new OEM set of fog lights for my 2007 Dakota from K2motor in Walnut, California. Sounded like such a good deal ($125 plus $22 shipping in Canada). Received the kit a few days ago and everything is there except the installation instructions. According to the supplier they do not have the instructions. What can I do now to install them after the cut outs are made in the plastic bumper cover?
DJB
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
