| From | Message |
ironworker
Dodge Dakota
JOIN HERE
2/05/2002
00:40:36
|
 Subject: CW
IP: Logged
Message:
tell about yur grill. who what when where $ hell
everything. just a bit nossy
|
CW
GenIII
 
2/05/2002
08:57:12
|  RE: CW
IP: Logged
Message:
My grill? It is stock grill with Lund screen front in it. They snap into place. Kinda gives a black out look. Covers up that rad and condenser they didn't paint. Any local auto store should be able to get them. I have no idea how much I paid because I took them off of my '97 that I bought 3 years ago. I am sure they wouldn't run over $50 US though.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.
|
ironworker
Dodge Dakota
JOIN HERE
2/05/2002
11:25:43
|  RE: CW
IP: Logged
Message:
thanx, looks great! mite look better on my red!
is there a cut out for hood latch? again thanx
|
CW
GenIII
2/05/2002
14:17:53
| RE: CW
IP: Logged
Message:
I think there is now but when I bought them in '98 there wasn't. I just used a pair of side cutters to make the hole.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.
|
ironworker
Dodge Dakota
JOIN HERE
2/05/2002
14:24:49
| RE: CW
IP: Logged
Message:
thanzx again! can't hughes custom grind a cam for u
|
CW
GenIII
2/05/2002
19:46:21
| RE: CW
IP: Logged
Message:
Oh probably but I got these soooooo cheap that I couldn't pass them up. I got them for $68.00 a pop and that was Canadian Dollars not US. Gotta love employee discount. After I swap the new cams in I can send my old ones to hughs and he can regrind them for me. I don't know what kind of lift and duration I can get away with on this new engine. I am still not even posotive that the HO cams will fit.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
