| From | Message |
Brandon
Unregistered
3/03/2001
15:42:24
|
 Subject: Plug Wires???`
IP: Logged
Message:
So I have been reading about what brand of wire to buy and.....
What size? are the 8.5mm worth the extra $30
I am torn....I want to help out the ignition...but 0.5mm another $30 come on!
Both were for the MSD..
Thanks in advance
|
intense99dak
Gen III
3/03/2001
17:51:15
| RE: Plug Wires???`
IP: Logged
Message:
Save the $30 and get the 8mm wires. You won't see enough (if any) increase with the 8.5 to warrant the expense.
[Insert anti-flame disclaimer here]
You might want to invest a few dollars in new wire looms because the stock looms aren't large enough.
Chuck Robbins
'99 Dakota Sport
www.intense99dak.com
|
Bernd
GenIII
3/03/2001
18:51:13
| RE: Plug Wires???`
IP: Logged
Message:
I agree 100% with Chuck. Posted that on another thread as well.
8mm is all that's needed for street use (with the occasional track use).
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
opus
GenI
3/04/2001
11:15:07
| RE: Plug Wires???`
IP: Logged
Message:
I was having a problem with a bad miss.Tried the msd 8.5 wires,brass cap and rotor.They didnt help. So I tried the magnecor race wires. No more problem.They are kind of expensive(119.00)but to get rid of that miss was worth it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
