| From | Message |
dakota2000
Dodge Dakota
JOIN HERE
1/24/2002
01:33:51
|
 Subject: getting new shocks
IP: Logged
Message:
what are your shock suggestions for a 2000 cc dakota.thanks for all replies, mke
|
McClane
Dodge Dakota
JOIN HERE
1/24/2002
10:25:21
|  RE: getting new shocks
IP: Logged
Message:
I received a set of Bilsteins for my 1995 Dak recently, and they are fantastic. The Bilsteins are really firm, and don't bounce up and down after you go over a bump. I've noticed handling improve somewhat with the Bilsteins.
|
Boettli
Dodge Dakota
JOIN HERE
1/24/2002
22:21:14
|  RE: getting new shocks
IP: Logged
Message:
I bought a set of Edelbroch Performer IAS shocks for my 2001 2wd v8 Club Cab. Bumps are mellowed out and it has less body roll. I would recommend them, I order from www.truckperformance.com, I recommend them too.
|
Daddy-D
*GenIII*
1/24/2002
23:04:08
| RE: getting new shocks
IP: Logged
Message:
I got a set of KYB MonoMax shocks for my Dak.
They are a lot less expensive than the
Bilstiens and do a great job of stabilizing my
2WD Dak without making the ride harsh. One
important detail: the listed front shocks are too
soft - you have ot ask for P/N 565049 for the
correct damping (matches the rear damping
better).
Yes, I do like these shocks - a great value.
'98 DakSport C/C 3.9 2WD A/T
|
AcrophobiA
Dodge Dakota
JOIN HERE
1/27/2002
01:00:47
| RE: getting new shocks
IP: Logged
Message:
EDELBROCK PERFORMER IAS!!!! They're great and only $59.99 a piece.
|
rudy
Dodge Dakota
JOIN HERE
1/27/2002
12:55:09
| RE: getting new shocks
IP: Logged
Message:
I put on Monroe reflex on my 2000 club cab 4x4, not the trendious name in shocks they work though bigger and firmer over the stock shocks and they were around $45.00
|
scat pack
Dodge Dakota
JOIN HERE
1/28/2002
17:52:12
| RE: getting new shocks
IP: Logged
Message:
Acrophobia - where did you find the performer IAS for 59.95 - most places want 69.95 ? Thanks
|
2THEXTRM
GenIII
1/28/2002
19:04:28
| RE: getting new shocks
IP: Logged
Message:
National Tire and Wheel has them for that price scat pack.
Flowmaster stainless cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5" block lift, 33x11.50-16's, Superlift Truspeed Recalibrator
Powerslot Rotors, Ceramic Brake Pads
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
