| From | Message |
Glenn Duncan
Dodge Dakota
JOIN HERE
3/21/2010
09:41:08
|
 Subject: Tailgate swap
IP: Logged
Message:
I have an 89 Dakota with a rusty tailgate. I also have a tailgate from an 95 Dakota with a brake light. Where should I splice in the wire so the light works with out blinking with the turn signals? or will it work at all? Thx
|
Todd93/96Dak
Dodge Dakota
JOIN HERE
3/21/2010
11:04:14
| RE: Tailgate swap
IP: Logged
Message:
won't work. diff generation truck.
|
?
Dodge Dakota
JOIN HERE
3/25/2010
13:41:17
| RE: Tailgate swap
IP: Logged
Message:
If it fits ok , the center light could be 'spliced ' in to the brake wires , but - gets complicated .
Need a diode from each side to feed it .
If you go this way - the bar on the diodes
is the end to splice to that center light .
The other ends go to each side brake light connection..
|
super bee
GenI
3/26/2010
08:39:46
| RE: Tailgate swap
IP: Logged
Message:
dont listen to todd, it will fit just fine
not sure about the light though
1990 sport RC SB, 1995 318drivetrain, 3.92 gears (came with truck) Powertrax "traction system", 95 dash/steering wheel, hearthrob exhaust, headers, cutout after y-pipe, necessary electric fan add-a-leafs, 30x9.5 mud tires, cranked T-bars, AR 39 15x8 rims, grill guard, roll bars
|
JasonB
Dodge Dakota
JOIN HERE
3/27/2010
17:01:03
| RE: Tailgate swap
IP: Logged
Message:
splice it to the high mounted center brake light.
-OR-
if you have a 7-pin trailer connector, one of those pins is brake light, and the turn signals are different pins.
|
Hailey Pelton
Dodge Dakota
JOIN HERE
6/16/2019
00:39:31
|  RE: Tailgate swap
IP: Logged
Message:
I have a 98 dakota will a 97 tailgate for my
98
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
